DULUX Weathermax® HBR - PC405
Weathermax® HBR is a two pack polyurethane finish for long term durability in both exterior and interior areas. Weathermax® HBR is ideal for property maintenance as it has been specially formulated for brush and roller application with superior flow out of brushmarks. Weathermax® HBR is easily recoatable with itself after detergent degreasing and light abrasion. Weathermax® HBR is ideal for public spaces that may be prone to defacement by spray-can graffiti, as it is unaffected by Dulux Graffiti Eraser.
- Available in the full range of Dulux Colour Specifier Colours and AS2700 colours
- Excellent graffiti resistance - wipe clean with Dulux Graffiti Eraser
- Excellent gloss retention and yellowing resistance
- Excellent application and flow-out of brush marks
- Excellent toughness and abrasion resistance
- Higher film builds achievable by brush and roller than conventional polyurethanes
- Can be applied up to 125 microns in a single coat via spray application
- Easy to apply and maintain
|Weatherability||Excellent gloss and colour retention on exterior exposure.|
|Heat Resistance||Up to 120°C dry heat.|
|Water Resistance||Excellent resistance to fresh and salt water. Not suitable for immersion.|
|Abrasion Resistance||Excellent abrasion resistance when fully cured.|
|Solvent Resistance||Unaffected by splash and spillage of aliphatic and aromatic hydrocarbons, esters, ketones and common alcohols.|
|Acid Resistance||Preferred coating for splash and spillage of most acids.|
|Alkaline Resistance||Good resistance to splash and spillage of most alkalis.|
|Salt Resistance||Unaffected by splash and spillage of neutral and alkaline salt solutions.|
Roller, Brush, Airspray, Conventional Spray
Round off all rough welds and sharp edges, and remove weld spatter. Degrease by detergent wash according to AS1627.1. For all structural and decorative steel, abrasive blast clean to AS1627.4 Class 2.5. Remove all dust. Apply first coat before surface deterioration occurs.
Weathermax® HBR is the preferred topcoat for all structural and decorative steelwork exposed in aggressive environments such as coastal developments and commerical, industrial and infrastructure projects. Weathermax® HBR is also ideal for the maintenance of public spaces that may be prone to defacement by spray-can graffiti such as railway stations, ground level walls, underpasses, public car park walls, foyers, canopies, awnings, columns, screens, lifts and furniture and facades of shopping centres, sports centres and arts complexes.
4L and 20L packs
White, Light base, Deep Base, Clear Base, LF Golden Yellow, LF Signal Red, Black
Use and typical specification
Mild steel: Abrasive blast AS1627.4 Class 2.5. Typical system: 1 x Zincanode® 402 @ 75 microns + 1 x Duremax GPE @ 150 microns + 1 x Weathermax® HBR @100 microns.