INTERGRAIN Enviropro Timberseal
High performance, colour enhancing sealer for use on timber and parquetry floors.
- Water based
- Enhanced colour development
- Aids filling open grain timber
- Low odour
- Brings out timber colours and texture.
- Timber has an even appearance without discolouration or patchiness
|Gloss level Indicator||5-10%|
|Weatherability||Interior use only.|
|Water Resistance||Good water resistance|
|Acid Resistance||Suitable for splash with dilute acid only|
|Alkali Resistance||Suitable for splash only with dilute alkali|
All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. Fine sand the floor, finishing with 100 grit sandpaper, then with 150 mesh screenback and vacuum thoroughly with a commercial grade vacuum cleaner. Shake the pack for 1 minute prior to application. Cut in edges with a brush. Apply Timberseal at 10 - 12m²/L using a 11mm Selleys Spirit micro-fibre roller. Do not overwork the coating. Finishing strokes should be in the direction of the timber grain. Sand the sealer with a worn 150 mesh screen if needed. When screening, ensure that you move quickly over the floor and avoid creating hot spots. If grain raise occurs you can apply the first top coat and then screen the surface. This will create a smooth finish without having to recut the grain of the timber.
Use on timber and parquetry floors.
Use and typical specification
Intergrain Enviropro Timberseal is a high performance water based sealer that develops the natural colours of the timber. Timberseal aids in filling open grain timber, ensuring that the timber has an even appearance without discolouration or patchiness.