INTERGRAIN Liquid 8 Paint Remover
Code:
552-94807
A citrus based paint and timber coating remover.
Features
- Water based
- Removes paint and timber coatings
- Caustic free
- Citrus based
Benefits
- Can be used under all timber finishes.
- Does not darken timber
- Water soluble
- Easy to use
Performance Guide
Application
Brush
Surface Preparation
Protect any adjoining areas that you do not wish to strip. Apply a thick coat by broad synthetic bristle brush. Do not exceed coverage rates. Allow 15-30 minutes to penetrate and wrinkle or blister the coating. Times will vary depending on the type of finish and thickness of the coating to be removed. For best results cover with a plastic dropsheet to stop Liquid 8 from drying out. Test with a scraper to ensure that the paint is easily removed. Remove using a paint scraper or if appropriate a high pressure water cleaner. On timber surfaces, work in the direction of the grain. On curved or rough surfaces or mouldings use a synthetic hard bristle brush or scourer. Do not allow Liquid 8 to dry on the surface. For best results work in small areas at a time. Thick or stubborn coatings may require more than one application. Clean stripped surfaces thoroughly with water and allow to dry. Sand as necessary to remove any residue before refinishing the surface.
Clean Up
Water
Uses
Use on all interior and exterior timber, metal, brick and masonry surfaces.
Sizes
4L, 1L
Use and typical specification
Intergrain Liquid 8 is a fast acting, easy to use, water soluble gel timber finish and paint remover. Liquid 8's low odour and non-drip, citrus based gel formula allows for a safe and easy application on all horizontal and vertical surfaces. With excellent softening and penetration, it quickly and effectively removes most water and solvent based coatings. Liquid 8 is gentle on the surface and will not darken timber like some traditional strippers.