INTERGRAIN Woodblend Putty
A water based timber putty and grain filler for both interior and exterior use.
- Water based
- Interior & Exterior use
- Range of intermixable colours
- Sands to a fine, smooth finish
- Can match most timber colours
- Safe to use
- Does not shrink or crack
- Sets firmly
|VOC Properties||< 110g/L|
|Weatherability||Interior and Exterior use|
Surface must be in sound condition, clean, dry and free from dust, grease, wax and oil. Indentations and holes must be clear of all loose material. APPLICATION Apply Woodblend with a flexible filling blade or knife. Fill deep holes in approx. 10mm stages, allowing 2 hours drying time between each stage. To ease application, dampen blade with water. Wipe off excess with a slightly damp sponge. When dry, sand to a smooth finish. When using clear finishes, apply Woodblend after the first coat of clear to minimise smudging. For use as a grain filler, thin Woodblend with 5-10% water to achieve required consistency. Apply with a flexible filling blade or knife and allow to dry. When dry, sand back to bare timber, leaving filler only in the grain. IMPORTANT: Keep container tightly closed when not in use.
Use on all interior and exterior timber surfaces including weatherboards, decking, flooring and furniture. Woodblend can be used to fill nail holes, splits, knot holes and as a grain filler to give a smooth finish to timber surfaces.
Vic Ash/Meranti, Jarrah/Merbau, Walnut/Dark Oak, Cypress/Cedar, Teak/Blackwood, Radiata Pine/Baltic
Use and typical specification
Intergrain Woodblend is a water based timber putty and grain filler, suitable for both interior and exterior use. Woodblend has excellent durability, minimal shrinkage and low odour. It is easy to apply and sands to an extremely fine, smooth finish. Woodblend is suitable for use on all timber species and can be coated with water or oil based paints, stains and timber finishes. Woodblend is available in a range of popular timber colours which can be mixed to achieve custom shades.