INTERGRAIN Reviva Wood Cleaner
A high strength cleaner for use on all timber (new or weathered) prior to coating.
- Water based
- Removes water, rust and tannin stains
- High strength timber cleaner
- Ideal for cleaning both new, weathered, and all exterior timber before coating. For use before coating with exterior Intergrain timber finish product.
- Restores grey or weathered timber
- Can be used neat for removing harsh stains
Stiff bristle brush or broom
Remove surface dirt by sweeping or washing down with water. Shake Reviva thoroughly. Mix ONE (1) part Reviva to FOUR (4) parts water in a plastic container. For severe staining a stronger solution or repeat applications may be necessary. Tannin rich timbers may also require repeat applications, wash until the water used to rinse the Reviva off is clear. PRECAUTION: Avoid contact with painted or metal surfaces and vegetation. Protect using plastic sheeting. Rinse off thoroughly if contact occurs. Wet the timber surfaces to be cleaned with water. Apply Reviva mixture generously to the timber with a stiff bristle brush, broom or scouring pad. Scrub the timber vigorously. Clean complete sections at one time. Spot cleaning should be avoided to prevent patchy results. Leave mixture on the timber for 1015 minutes. If necessary, apply more mixture to keep timber damp throughout this period. For best results Reviva should be applied to cool surfaces, out of direct sunlight, to avoid the cleaner drying on the timber. Rinse off exterior surfaces thoroughly using maximum pressure from a garden hose or using a high pressure water cleaner. A high pressure water cleaner is recommended for large areas or badly discoloured timber. Interior surfaces must be rinsed clean with a sponge and water. NOTE: Failure to thoroughly remove mixture may result in timber discolouration under clear finishes. Allow timber to dry thoroughly before applying further products. In humid, tropical or mould susceptible areas, cleaned timber should be coated with Intergrain TSS. Note: After cleaning, some timber species will appear bleached due to loss of water soluble extractives. Richer colour is generally restored on application of the finish.
Use on all exterior timber including decking, outdoor furniture, weatherboards, pergolas, window frames, trim, fences and marine timbers.
10L, 4L, 1L
Use and typical specification
Intergrain Reviva is a unique, high strength cleaner that restores grey, rust and tannin stained, mould or mildew affected timber to a clean appearance suitable for coating. Reviva is also used to clean and prepare new timber for coating by removing the dirt, tannins, oils and other contaminants that are present. Reviva has a non-bleaching formula and contains oxalic acid, which is a naturally occurring, bio-degradable organic acid.