INTERGRAIN TSS

Code: 552-94816

Treatment for interior and exterior bare and painted surfaces in humid, tropical and mould susceptible areas.

Features

  • Water based
  • Low odour
  • Fast acting

Benefits

  • Eliminates and prevents mould, fungi, bacteria
  • Penetrates deep into timber
  • Easy to use

Performance Guide

VOC Properties0 g/L

Application

Brush, Applicator or Spray

Surface Preparation

Exterior Timber: Clean timber with Intergrain Reviva Timber Cleaner closely following label instructions. Ensure surface is rinsed clean and allowed to thoroughly dry. Interior Timber: Clean timber with warm soapy water. Ensure surface is rinsed clean and allowed to thoroughly dry. APPLICATION Do not thin. Apply ONE GENEROUS coat by brush, roller, applicator or spray (H.V.L.P or airless). if applying by roller or spray, backbrush the product into the timber. Several applications may be necessary to ensure full saturation on absorbent end grains or joinery. Allow 24 hours before painting or staining the area. Do not allow the treated surface to become wet prior to painting or staining as this will decrease the effectiveness of TSS. Note: Lack of visible mould growth does not necessarily indicate an uncontaminated surface. Many spores are not visible to the naked eye and can germinate and grow through surface coatings and timber stains.

Clean Up

Water

Uses

Use on all interior and exterior timber, new, bare or painted surfaces that may be susceptible to, or already contaminated by mould, fungi or algae.

Sizes

4L, 1L

Use and typical specification

Intergrain TSS is a treatment for use on interior and exterior timber and painted surfaces in humid, tropical and mould susceptible areas. TSS prevents the growth of most mould species and is ideal for use under Intergrain Timber Finishes.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page