Dulux Wash&Wear Semi Gloss
52S-04912, 52S-04914, 52S-16101
The mid-level sheen of Dulux Wash&Wear Semi Gloss is a finish that works well on walls or even as an alternative to enamels on doors and skirting boards. The hard-wearing film made by the 101 Barrier Technology provides robust resistance to wear and tear.
- Water based
- Withstands wear and tear
- Mid level sheen for walls
- Easy application, quick drying
- Most stains and marks can be removed with a soft wet cloth
- Can be used on doors & trim as an enamel replacement
|Gloss Level Indicator||25|
|VOC Properties||< 16 g/L tinted and untinted|
|Weatherability||Not recommended for exterior use|
|Heat Resistance||Softens and sticks to other painted surfaces over 70C|
|Water Resistance||Suitable for use in wet areas|
|Abrasion Resistance||Marks and soiling easily removed. Excellent wet and dry burnish resistance.|
|Solvent Resistance||Sensitive to aromatic hydrocarbons and alcohols|
|Green Star||Complies with the requiremenrs for the Indoor Environment Quality credit in Green Star Australia rating tools|
Roller, Brush, Spray.
Coverage - 16 square metres per L
Surface must be clean, dry and free from dust, oils and grease.
Cracks or holes with filler: Spot prime repairs with Dulux 1 Step® Water Based
Glossy surfaces: Lightly sand to a dull finish
Unpainted plasterboard, brick, cement: One coat of Dulux 1 Step® Water Based
Bare timber: One coat of Dulux 1 Step® Water Based
Set plaster, fibrous plaster, plasterglass: One coat of Dulux Sealer Binder
Clean all equipment with water.
Dulux Wash&Wear Semi Gloss is recommended for all walls including frequently cleaned areas and wet areas.
1L, 2L, 4L, 10L, 15L
Can be machine tinted to a wide range of colours from white, deep and ultra deep bases
Use and typical specification
Use Dulux Wash&Wear Semi Gloss on walls where a durable, mark resistant finish is required.