DULUX Professional Interior Low Sheen

Code: 587-LINE

Approvals: APAS 0260/3, AS3730, Part 3.

DULUX Professional Interior Low Sheen produces a high quality low sheen finish with good washability. Recommended for all interior broadwall surfaces, can be tinted to all Dulux colours.

Features

  • Water based
  • Low odour
  • Easy to apply
  • Low sheen finish.

Benefits

  • Same day recoat. Easy Cleanup
  • No lingering paint fumes after application
  • Easy spreading and lapping on broadwall areas to speed up application time.
  • Best sheen level for use on broadwall areas, can be lightly cleaned.

Performance Guide

Gloss level5-10 units
VOC Properties<70g/L

Application

Roller, Brush, Airspray, Con-Spray

Surface Preparation

All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas. Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.

Clean Up

Clean all equipment with water

Sizes

4L, 10L, 15L,

Bases

White, Deep, Ultra Deep, Extra Bright, Red, Yellow, Magenta, Orange, Blue

Use and typical specification

DULUX PROFESSIONAL Interior Low Sheen Acrylic can be used on all interior walls and is particularly recommended for use in family rooms, children's rooms and hallways. Can also be used in areas subject to steam and condensation.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page