DULUX Professional Interior Flat

Code: 609-LINE

Approvals: APAS 0260/4, APAS-0260/5, AS3730, Part 1.

DULUX Professional Interior Flat is a water based product suitable for use on walls. The use of a flat sheen level will help to hide minor surface imperfections.


  • Water based
  • Low odour
  • High opacity
  • Flat finish


  • Same day recoat. Easy Cleanup
  • No lingering paint fumes after application
  • Saves application time.
  • Helps hide minor surface imperfections, producing a smooth even finish.

Performance Guide

Gloss level<1 unit
VOC Properties< 55g/L untinted


Roller, Brush, Airspray, Con-Spray

Surface Preparation

All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas. Note : To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.

Clean Up

Clean all equipment with water


4L, 10L, 15L,


White, Deep, Ultra Deep

Use and typical specification

Use DULUX PROFESSIONAL Interior Flat Acrylic on all broad walls not subject to frequent cleaning and all ceilings where a flat finish is required.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page