DULUX Weathershield Gloss Acrylic
APAS-0280/1, AS3730, Part 10.
An acrylic self priming paint for exterior use. Its unique MaxiFlex™ Stretch Technology gives a tough flexible finish, for long life protection all Australian weather conditions. Dulux guarantees that this product will not blister, flake or peel for as long as you are living in your house.
- Self priming
- Water based
- 100% acrylic paint with MaxiFlex technology
- The Dulux Promise. Guaranteed for as long as you are living in your house.
- Tannin resistant
- Apply direct to most bare surfaces
- 2 hour recoat and easy clean up.
- Excellent durability - expands & contracts with climate changes
- Long lasting.
- No primer required to prevent staining on bare timber
- Easy to apply by brush, roller or spray
|Gloss Level Indicator||65|
|VOC Properties||<75 g/L untinted|
|Weatherability||Excellent resistance to weathering, with very low level of chalking, colour change and dirt pick up.|
|Heat Resistance||Softens at temperatures above 70°C.|
|Water Resistance||Resists prolonged rain and condensation.|
|Abrasion Resistance||Good resistance to abrasion.|
|Solvent Resistance||Sensitive to aromatic hydrocarbons, alcohols and ketones.|
|Salt Resistance||For galvanised iron within 1 km of the sea (or other salty areas), prime with Dulux Quit Rust All Metal Primer|
Roller, Brush, Airspray, Con-Spray.
Coverage - 16 square metres per L
All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint. Metal surfaces should be free of rust, salts & any signs of corrosion. Efflorescence or mould on masonry or concrete surfaces must be treated. Occasionally an apparently sound old paint will lose adhesion when recoated, particularly if the new paint is darker in colour. To avoid this, check the adhesion of the old paint by cutting an 'X' through a clean area of the film with a sharp knife, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before repainting.
Clean all equipment with water
DULUX WEATHERSHIELD® Gloss is a 100% acrylic self priming paint for exterior use. Its unique MaxiFlex Stretch Technology gives a tough, flexible finish for long life protection from the extremes of weather.
THE DULUX PROMISE Guaranteed for as long as you are living in your house.
We guarantee, as long as Weathershield is applied in accordance with the instructions for use, Weathershield will not PEEL, FLAKE or BLISTER for as long as you are living in your house. We should know, we have been testing Weathershield in Australian Conditions for over 40 years. We believe in the quality of Weathershield so strongly, that if it doesn’t deliver, we will replace the product free of charge. It’s the Dulux Promise.
This guarantee does not cover paint failure caused by any breakdown of coatings applied previously, where Weathershield is applied over coatings not specified by Dulux or in the event of substrate failure. To claim you must be living in the house you have painted with Weathershield.
1L, 2L, 4L, 10L, 15L
A full range of colours from an extensive range of white and coloured bases.
Use and typical specification
DULUX WEATHERSHIELD® Gloss Acrylic provides a long lasting exterior gloss finish on masonry, bricks, concrete, render, fibro cement, exterior timber, Zincalume®, galvanised iron and correctly primed steel and wrought iron. Dulux guarantees that Weathershield will not blister, flake or peel for 10 years, provided it is applied on properly prepared surfaces as per label directions. This guarantee does not cover paint failure caused by any breakdown of coatings applied previously. If Dulux Weathershield does not perform as specified above, Dulux will provide free of charge paint to rectify the affected areas.