DULUX Metalshield RFU Etch Primer
A high performance primer that provides outstanding adhesion and protection to a wide range of metal surfaces. Its ready for use formulation is optimised for brush application and is ideal where rapid top coating is required.
- Optimised for brush application
- Etches the surface for superior adhesion and outstanding metal protection
- Can be used on a wide range of metal surfaces
- Topcoat after 15 minutes
Roller, Brush, Airspray
NOTE: Ensure the surface has thoroughly dried prior to application. Do not apply on top of existing painted surfaces. Commercial applications may require additional surface preparation. AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt.
NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water.
ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water.
Clean up with Acetone.
Suitable for priming galvanised iron, zincalume, aluminium, copper, brass, stainless steel, steel and wrought iron surfaces. Use in combination with Metalshield topcoats for industrial strength metal protection.
500ml, 1L, 4L