DULUX Professional Cold Galv. Primer
DULUX Professional Cold Galv. Metal Primer is a one pack zinc rich primer which imparts excellent corrosion protection for ferrous metals situated in coastal environments.
- Zinc rich
- Excellent adhesion
- One pack
- Recoatable with all systems
- Provides excellent corrosion protection for ferrous metals, particularly in coastal environments.
- Bonds tightly to all ferrous metals.
- Ready to use. No mixing of different components, no limited pot-life.
- Topcoat with water based or oil based paints.
|VOC Properties||< 500g/L untinted|
The surface to be primed must be clean, dry and free from oil, rust and millscale. Ideally the surface to be coated should be sand blasted, then primed on the same day. Where this is impracticable, oxyacetylene flame cleaning and descaling or other mechanical preparation may be employed. This is essential to achieve maximum protection. DO NOT USE CLEANING FLUIDS CONTAINING ACID, AS THIS WILL REACT WITH THE COATING CAUSING LACK OF ADHESION.
Clean equipment with mineral turps.
Use and typical specification
Use DULUX PROFESSIONAL Cold Galv. Primer as an anti-corrosive primer for all ferrous metals eg. Steel & Wrought Iron. Particularly useful for severe exposure conditions, eg. coastal environments. Acrylics can be applied directly over DULUX PROFESSIONAL Cold Galv. Primer, however a coat of DULUX PROFESSIONAL Acrylic Primer Undercoat is necessary before applying solvent based topcoats. Can also be used as a shop primer for selected top coat systems.