DULUX AcraTex 951 Coventry Coarse
Code:
194-85753
DULUX AcraTex 951 Coventry Coarse is our market leading, flexible acrylic texture that delivers a traditional float finish render style in a fine-medium grain, coloured, full acrylic coating. Applied by traditional hawk and trowel plastering methods over base rendered and prepared brick or blockwork and all suitably flushed and prepared masonry substrates.
Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle effeciency
Features
- 7 year warranty when used as a full Acra-Tex system
- Pre-mixed ready for use
- Fast processing & Long "wet edge"
- Low maintanance
Benefits
- Guaranteed long term exterior durability.
- Tuscan style look & finsh in a range of colours
- Quick, efficient, and levels uneven cement based surafces to an even finish
- Weatherproof & stays cleaner longer reducing maintenance when top coated with 955 Acrashield
Performance Guide
| Weatherability | ] Excellent resistance to cracking, flaking and chalkingwhen topcoated with DULUX AcraTex 955 AcraShield. |
| Heat Resistance | ] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1. |
| Water Resistance | ] Resists rain and condensation when top coated with a full Acra-Tex system. |
| Abrasion Resistance | ] Excellent resistance to abrasion. |
| Solvent Resistance | ] Resists achohols & aliphatic hydrocarbons. Sensitive to other strong solvents. |
| Acid Resistance | ] Slight softening with dilute acids. Best when topcoated with DULUX AcraTex 955 AcraShield |
| Alkaline Resistance | ] Slight softening with dilute alkalis. Best when topcoated with DULUX AcraTex 955 AcraShield |
| Salt Resistance | ] Resists salt spray when topcoated with DULUX AcraTex 955 AcraShield. |
Surface Preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Clean Up
Clean all equipment with water.
Bases
Tintable to pastel & deep colours - Max 1y per litre tint.
Use and typical specification
Applied by Plastering Technique (Hawk and Trowel) and float finished to a produce a Flexible Acrylic Sand Finish for Commercial or Residential facades
951 Coventry Coarse is specified in system with AcraPrime and AcraShield
|
| Typical System Specification |
951 Coventry Coarse specified in a full AcraTex 3-step Texture system |
| Substrate Preperation |
Relative to Project Substrate and Specified Finish - refer
to Project Specific Duspec Specification and AcraTex Substrate Guide |
|
Product |
Spread Rate (Sqm/L) |
WFT (Micron) |
DFT (Micron) |
| Primer |
AcraPrime 501 |
10 |
100 |
25 |
| Texture / Body Coat |
951 Coventry Coarse |
0.8 |
1250 |
1000 |
| Protective Barriercoat |
955 AcraShield |
6 |
166 |
75 |
| Minimum system DFT |
1100 |
| Notes |
TYPICAL specification example over a levelled substrate - for full detail refer to
Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
|
System performance data
| Test results |
Test method |
Unit of measure |
Results |
Comment |
| Water Transmission |
AS458.5/B |
g/24h/m2/kpa |
220g/24h/m2/kPa |
Outsanding moisture barrier when top coated with 955 Acrashield |
| Water Vapour Transmission |
AS458.5/C |
g/24h/m2 |
56.5g/24h/m2 |
Allows substrate to breath even when top coated with 955 Acrashield |
Dirt Pick Up |
(AS 1580 481.14) |
(scale 0-5 with 0 is no dirt) |
1 |
Excellent dirt ressistance when top coated with 955 Acrashield |
Caustic Soda diluted |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Alchol |
<N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Diluted mineral acid |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Distilleed Water |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Detergent Solution |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Typical properties and application data
| Application Guide |
DULUX AcraTex 951 Coventry Course is a applied by Plastering Technique (Hawk and Trowel) and float finished . Once applied the product is processed with a plastic finishing float to a uniform fine trowel finish. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets |
| Technology Type |
100% Acrylic |
| Volume solids |
75% |
| Number of coats |
1 |
| WFT (Micron per coat) |
1333 |
| DFT (Micron per coat) |
1000 |
| Spread Rate Sqm/L Per coat |
0.8 |
| Touch Dry |
60 Minutes |
| VOC content |
<35g/L untinted |
| Toxicity |
Lead free. Forms a non toxic film. Conforms to AS1647.3 |
| Application |
steel trowel & plastic float |
| Clean up |
Water |
| Recoat Time (25°C,50%R.H.) |
24 hours |
Full Cure (25°C,50%R.H.) |
7 days |
| Shelf Life |
24 months maximium |
| Sizes |
15 Litres |
Notes |
Spread rates nominated are theoretical maximum rates
required to achieve the specified film builds for technicalperformance
|