DULUX AcraTex 951 Coventry Quartz Coat

Code: 194-85625

DULUX AcraTex Coventry Quartz Coat is a tintable, trowel applied, decorative texture coating producing a fine classic Tuscan style look. The coloured granular sand- finish is enhanced with a finish coat of Dulux AcraGlaze producing a subtle mineral glistening special effect to highlight the features of any project.

Features

  • Natural "Mineral" appearance
  • Flexible Acrylic Sand-Texture
  • Dirt & Water resistance
  • Even & Level Textural profile

Benefits

  • Classic Tuscan style look
  • Hides & accomidates cement render movement & cracks
  • Long term performance - extended when topcoated with AcraGlaze or AcraShield
  • Consistent appearance - No variable sponge render surface finish.

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalking when applied as a full Acra-Tex system with topcoat.
Heat Resistance] Up to 90C (dry).
Water Resistance] Resistance rain and condensation when used as a basecoat in a full Dulux AcraTex Acrylic Texture Systems.
Abrasion Resistance] Resists salt spray especially when topcoated when applied as a full Acra-Tex system with topcoat.
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to other stronger solvents.when applied as a full Acra-Tex system with topcoat.
Acid Resistance] Slight softening with dilute acid. Inert when applied as a full Acra-Tex system with topcoat.
Alkaline Resistance] Slight softening with dilute alkali. Inert when applied as a full Acra-Tex system with topcoat.
Salt Resistance] Resists salt spray especially when applied as a full Acra-Tex system with topcoat.

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water

Bases

Tintable to Pastel & Deep colours. Max 1y per litre tint.

Use and typical specification

Applied by Plastering Technique (Hawk and Trowel) and float finished to a produce a Flexible Acrylic Sand Finish for Commercial or Residential facades
951 Coventry Quartz Coat is specified in system with AcraPrime and AcraShield
Typical System Specification 951 Coventry Quartz Coat specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat 951 Coventry Quartz Coat 0.8 1250 1000
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 1100
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

System performance data

<
Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa 220g/24h/m2/kPa Outsanding moisture barrier when top coated with 955 Acrashield
Water Vapour Transmission AS458.5/C g/24h/m2 56.5g/24h/m2 Allows substrate to breath even when top coated with 955 Acrashield
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with 955 Acrashield
Caustic Soda diluted N/A N/A No reaction Test resulst are with 955 Acrashield top coat
AlcholN/A N/A No reaction Test resulst are with 955 Acrashield top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

Typical properties and application data

Application Guide DULUX AcraTex 951 Coventry Quartz Coat is a applied by Plastering Technique (Hawk and Trowel) and float finished . Once applied the product is processed with a plastic finishing float to a uniform fine trowel finish. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets
Technology Type 100% Acrylic
Volume solids 70%
Number of coats 1
WFT (Micron per coat) 1009
DFT (Micron per coat) 703
Spread Rate Sqm/L Per coat 0.8
Touch Dry 60 Minutes
VOC content <35g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Steel Trwoel & Plastic Float
Clean up Water
Recoat Time (25°C,50%R.H.) 24 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page