DULUX AcraTex 952 Spray On 1mm
Code:
194-20818
Approvals:
APAS-118/4 (system approval)
DULUX AcraTex 952 1mm is a flexible 100% acrylic, low profile sand finish Texture Coating designed for broad wall application typically for Commercial Applications producing a Tuscan style mineral appearance.
Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle effeciency
Features
- 7 year warranty when used as a full Acra-Tex system
- 100% water-based acrylic
- Fast Spray applicatioinn - high iscosity
- Low maintanance
Benefits
- Guaranteed long term exterior durability.
- Easy, safe and economical clean-up.
- Ideal for spray application for uniform finish.
- Weatherproof & stays cleaner top reducing maintenance when top coated with 955 Acrashield
Performance Guide
| Weatherability | ] Excellent resistance to cracking, flaking & chalking as part of full system. |
| Heat Resistance | ] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1. |
| Water Resistance | ] Resists rain and condensation when top coated with Dulux Acra-Tex 955 Acrashield |
| Abrasion Resistance | ] Good abrasion resistance especially when topcoated with DULUX AcraTex 955 AcraShield. |
| Solvent Resistance | ] Resists alcohol and aliphatic hydrocarbons. Sensitive to other strong solvents. |
| Acid Resistance | ] Slightly softening with dilute acids. Inert when topcoated with DULUX AcraTex 955 AcraShield. |
| Alkaline Resistance | ] Slightly softening with dilute alkalis. Inert when topcoated with DULUX AcraTex 955 AcraShield. |
| Salt Resistance | ] Resists salt spray. |
Surface Preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Clean Up
Clean all equipment with water.
Sizes
15L
Bases
Tintable to Pastel & Deep colours. Max 1y per litre tint.
Use and typical specification
Applied by Hopper Gun (gravity feed) or Air-assisted TexSpray pump, to produce a fine-medium (aggregate) Texture profile.
Typically used for broadwall Commercial facades, 952 Spray On 1mm is specified in system with AcraPrime and AcraShield
|
| Typical System Specification |
952 Spray On 1mm specified in a full AcraTex 3-step Texture system |
| Substrate Preperation |
Relative to Project Substrate and Specified Finish - refer
to Project Specific Duspec Specification and AcraTex Substrate Guide |
|
Product |
Spread Rate (Sqm/L) |
WFT (Micron) |
DFT (Micron) |
| Primer |
AcraPrime 501 |
10 |
100 |
25 |
| Texture / Body Coat |
952 Spray On 1mm |
1.3 |
800 |
500 |
| Protective Barriercoat |
955 AcraShield |
6 |
166 |
75 |
| Minimum system DFT |
600 |
| Notes |
TYPICAL specification example over a levelled substrate - for full detail refer to
Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
|
System performance data
| Test results |
Test method |
Unit of measure |
Results |
Comment |
| Water Transmission |
AS458.5/B |
g/24h/m2/kpa |
<1.0g/24h/m2/kPa |
Provides a barrier agianst water ingress when top coated with 955 Acrashield |
| Water Vapour Transmission |
AS458.5/C |
g/24h/m2 |
23.4g/24h/m2 |
Allows substrate to breath even when top coated with 955 Acrashield |
Dirt Pick Up |
(AS 1580 481.14) |
(scale 0-5 with 0 is no dirt) |
1 |
Excellent dirt ressistance when top coated with 955 Acrashield |
Caustic Soda diluted |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Alchol |
<N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Diluted mineral acid |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Distilleed Water |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Detergent Solution |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Typical properties and application data
| Application Guide |
Dulux AcraTex Spray-On 1mm is applied in two passes using a DULUX AcraTex hopper gun. Thin slightly with water to aid application of the first pass, to form a low profile motley base completely covering the substrate. Apply the second pass unthinned at 60% cover to achieve the required finish. GUn set up uses a 2 to 4mm fluid nozzle set at 50-60 psi for the first pass and 30-40 psi for the second pass. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
|
| Technology Type |
100% Acrylic |
| Volume solids |
65% |
| Number of coats |
1 |
| WFT (Micron per coat) |
800 |
| DFT (Micron per coat) |
500 |
| Spread Rate Sqm/L Per coat |
1.3 |
| Touch Dry |
60 minutes |
| VOC content |
<30g/L untinted |
| Toxicity |
Lead free. Forms a non toxic film. Conforms to AS1647.3 |
| Application |
Hopper Gun - Spray |
| Clean up |
Water |
| Recoat Time (25°C,50%R.H.) |
24 hours |
Full Cure (25°C,50%R.H.) |
7 days |
| Shelf Life |
24 months maximium |
| Sizes |
15 Litres |
Notes |
Spread rates nominated are theoretical maximum rates
required to achieve the specified film builds for technical performance
|