DULUX AcraTex Roof Sealer WB

Code: 194-85940

DULUX AcraTex Roof Sealer WB is a full acrylic, water based primer/sealer for use on cleaned concrete tile surfaces in sound condition. NOT suitable where the surface after High Pressure Washing is Powdery of Friable – Use AcraTex Roof Sealer SB in such cases

Features

  • Water based
  • Excellent pentration & adhesion
  • Fast dry

Benefits

  • Easy application, clean up
  • Foundation for uniform adhesion & durability of Roof Membrane
  • 2 Hour recoat

Performance Guide

Weatherability] Excellent resistance when topcoated
Heat Resistance] Resistant up to 90 degrees celcius when topcoated with 962 roof Memebrane
Water Resistance] Excellent resistance when topcoated with 962 roof Memebrane
Solvent Resistance] Resists dilute solvent
Acid Resistance] No reaction to 3% hydrochloric acid
Alkaline Resistance] No reaction to 1% caustic solution
Salt Resistance] Excellent resistance when topcoated with 962 roof Memebrane

Application

Airspray

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Sizes

15L

Bases

Milky White, Not tintbale

Use and typical specification

DULUX AcraTex Roof Sealer WB is used to unify and consolidate correctly prepared concrete roof tiles providing a good key for DULUX AcraTex 962 Roof Membrane. It is designed to condition and even the substrate porosity to provide maximum coverage for DULUX AcraTex 962 Roof Membrane. Note : Not suitable where the tile surface is excessively friable (eg powdery surface easy to remove by scratching-scraping), where the use of AcraTex Roof (Sealer based) is recommended

Typical properties and application data

Application Guide DULUX AcraTex Roof Sealer WB is a applied by airless spray and allow to dry minimum 2 hours before topcoating. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 30%
Number of coats 1
WFT (Micron per coat) 83
DFT (Micron per coat) 25
Spread Rate Sqm/L Per coat 10.0
Touch Dry 30 Minutes
VOC content <10.1g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Spray
Clean up Water
Recoat Time (25°C,50%R.H.) 2 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page