DULUX AcraTex 950 Roll On 3mm

Code: 194-20815

Approvals: APAS-0117/4,APAS-0118/4 (system approval)

DULUX AcraTex 950 3mm is a flexible 100% acrylic, low-mid profile Texture Coating applied variously by medium or coarse texture roller to produce a distinctive granular roller stipple 950 Roll On 3mm provides feature style with good covering ability to accommodate less than perfectly leveled substrates Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle efficiency

Features

  • Water based
  • Fast & easy appplication
  • Provides substrate protection and a decorative texture look
  • 7 year warranty when applied as a full Acra-Tex system

Benefits

  • Easy, safe and economical clean-up.
  • Weatherproof & stays cleaner top reducing maintenance when top coated with 955 Acrashield
  • Quick, efficient application with medium texture roller
  • Guaranteed long term exterior durability.

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalkingwhen topcoated with DULUX AcraTex 955 AcraShield.
Heat Resistance] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance] Resists water and condensation when topcoated with DULUX AcraTex 955 AcraShield.
Abrasion Resistance] Good abrasion resistance especially when topcoated with DULUX AcraTex 955 AcraShield
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to strong solvents.
Acid Resistance] Slight softening with dilute acids. Inert when topcoated with DULUX AcraTex 955 AcraShield.
Alkaline Resistance] Slight softening with dilute alkali. Inert when topcoated with DULUX AcraTex 955 AcraShield.
Salt Resistance] Resists salt spray especially when topcoated with DULUX AcraTex 955 AcraShield.

Application

Roller

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water after use.

Sizes

15L

Bases

Tintable to Pastel & Deep colours. Max 1y per litre tint.

Use and typical specification

Applied by medium cell Texure Roller to produce a medium profile (aggregate containing) Texture Finish for Commercial or Residential facades
950 Roll On 3mm is specified in system with AcraPrime and AcraShield
Typical System Specification 950 Roll On 3mm specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat 950 Roll On 3mm 1.3 750 450
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 550
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

System performance data

<
Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with 955 Acrashield
Water Vapour Transmission AS458.5/C g/24h/m2 55g/24h/m2 Allows substrate to breath even when top coated with 955 Acrashield
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with 955 Acrashield
Caustic Soda diluted N/A N/A No reaction Test resulst are with 955 Acrashield top coat
AlcholN/A N/A No reaction Test resulst are with 955 Acrashield top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

Typical properties and application data

TR>
Application Guide Dulux AcraTex 950 Roll-On 3mm Grade: Low profile by regular texture roller at 1.3 sq.m/l, high profile by coarse texture roller at 1.1 sq.m/l, stucco by regular texture roller/steel trowel at 1.0 sq.m/l. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 60%
Number of coats 1
WFT (Micron per coat) 750
DFT (Micron per coat) 450
Spread Rate Sqm/L Per coat 1.3
Touch Dry 60 minutes
VOC content <40g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Texture roller
Clean up Water
Recoat Time (25°C,50%R.H.) 24 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page