DULUX AcraTex 958 Sedona
Code:
19485911-12
Approvals:
AS4548.4 : Long Life Coatings for Masonry
DULUX AcraTex 958 Sedona is a flexible 100% acrylic, mid build sand texture, formulated to produce a granular sand texture with low profile roller stipple by conventional nap roller or fine texture roller stipple for higher film build and substrate covering power.
Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle efficiency
Features
- High Solids - High Film build
- Flexability
- Good External Durability - Weather resistance.
- Pastel and Ultra Deep Bases
- Various Finish options
- Self Priming
Benefits
- Enhances Sponge Finish Render profile
- Increased system Crack Bridging performance
- Weatherproof & stays cleaner top reducing maintenance when top coated with 955 Acrashield
- Wide colour range, tintable for fast project turn-around
- Light relief Sandy Texture (nap roller) or Medium Texture (texture rolller)
- No primer required on sound, cured masonry substrates
Performance Guide
| Weatherability | ] Excellent resistance to cracking, flaking and chalkingwhen topcoated with DULUX AcraTex 955 AcraShield.. |
| Heat Resistance | ] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1. |
| Water Resistance | ] Resists water and condensation when topcoated with DULUX AcraTex 955 AcraShield. |
| Abrasion Resistance | ] Good resistance to abrasion. when topcoated with DULUX AcraTex 955 AcraShield. |
| Solvent Resistance | ] Resists alcohol and aliphatic hydrocarbons. Sensitive to other strong solvents. |
| Acid Resistance | ] Slightly softening with dilute acids. |
| Alkaline Resistance | ] New Cement / Concrete surfaces should be allowed to cure for 28 days to stabalise alkalinity |
| Salt Resistance | ] Resists salt spray. when topcoated with DULUX AcraTex 955 AcraShield. |
Application
Roller, Brush
Surface Preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Clean Up
Clean all equipment with water.
Sizes
15L
Bases
Tintable to Pastel & Deep colours. Max 2y per litre tint.
Use and typical specification
Applied by either nap roller or medium texture roller (dependant on required texture profile) over levelled masonry for Commercial or Residential facades
958 Sedona is typically specified as a 2 coat, nap roller application over AcraPrime to produce and even granular appearance. For ultimate durability AcraShield Performance Topcoat is recommended
|
| Typical System Specification A |
958 Sedona specfied for nap Roller application |
| Substrate Preperation |
Relative to Project Substrate and Specified Finish - refer
to Project Specific Duspec Specification and AcraTex Substrate Guide |
|
Product |
Spread Rate (Sqm/L) |
WFT (Micron) |
DFT (Micron) |
| Primer |
AcraPrime 501 |
10 |
100 |
25 |
| Texture / Body Coat |
958 Sedona |
3.0 |
333 |
160 |
| 2nd coat (for best finish) |
958 Sedona |
3.0 |
333 |
160 |
| Protective Barriercoat |
955 AcraShield |
6 |
166 |
75 |
| Minimum system DFT |
420 (in system with 2 coats 958 Sedona) |
|
| Typical System Specification B |
958 Sedona specified for Texture Roller application |
| Substrate Preperation |
Relative to Project Substrate and Specified Finish - refer
to Project Specific Duspec Specification and AcraTex Substrate Guide |
|
Product |
Spread Rate (Sqm/L) |
WFT (Micron) |
DFT (Micron) |
| Primer |
AcraPrime 501 |
10 |
100 |
25 |
| Texture / Body Coat |
958 Sedona |
2.0 |
500 |
240 |
| Protective Barriercoat |
955 AcraShield |
6 |
166 |
75 |
| Minimum system DFT |
340 |
| Notes |
TYPICAL specification examples - for full detail refer to
Project Specific Duspec Specification and individual Product Data
Sheets
Spread rates nominated are theoretical maximum rates required to
achieve the specified film builds for technical
performance
|
System performance data
| Test results |
Test method |
Unit of measure |
Results |
Comment |
| Water Transmission |
AS458.5/B |
g/24h/m2/kpa |
<1.0g/24h/m2/kPa |
Provides a barrier agianst water ingress when top coated with 955 Acrashield |
| Water Vapour Transmission |
AS458.5/C |
g/24h/m2 |
????g/24h/m2 |
Allows substrate to breath when top coated with 955 Acrashield |
Dirt Pick Up |
(AS 1580 481.14) |
(scale 0-5 with 0 is no dirt) |
1 |
Excellent dirt ressistance when top coated with 955 Acrashield |
Caustic Soda diluted |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Alchol |
<N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Diluted mineral acid |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Distilleed Water |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Detergent Solution |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Typical properties and application data
| Application Guide |
Dulux AcraTex 958 Sedona is applied by brush or nap roller in a two coat application to achieve a medium - course granular sand-paint style finish. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
|
| Technology Type |
100% Acrylic |
| Volume solids |
48% |
| Number of coats |
2 |
| WFT (Micron per coat) |
333 |
| DFT (Micron per coat) |
160 |
| Spread Rate Sqm/L Per coat |
3.0 |
| Touch Dry |
60 Minutes |
| VOC content |
<75g/L untinted |
| Toxicity |
Lead free. Forms a non toxic film. Conforms to AS1647.3 |
| Application |
Nap Roller, Texture Roller , Brush |
| Clean up |
Water |
| Recoat Time (25°C,50%R.H.) |
2 hours |
Full Cure (25°C,50%R.H.) |
7 days |
| Shelf Life |
24 months maximium |
| Sizes |
15 Litres |
Notes |
Spread rates nominated are theoretical maximum rates
required to achieve the specified film builds for technical performance
|