DULUX AcraTex 956/2 AcraGlaze Solvent Based

Code: 194-20812

DULUX AcraTex 956/2 AcraGlaze Solvent Based is a clear deep gloss finish for application over decorative concrete and masonry substrates where a decorative “wet look” finish is required. Gloss and appearance is enhanced with multiple applications relevant to substrate porosity

Features

  • high performance solvent-acrylic resin
  • Hard glossy clear film
  • Clear natural look

Benefits

  • A tough, durable protective coating. Durable, UV and water resistant,
  • Resists dirt pick-up, easier to clean & good soil shedding.
  • Bindsand Provides a natural look to exposed stone aggregates.

Performance Guide

Weatherability] Excellent resistance to cracking and flaking as the topcoat of a full system.
Heat Resistance] Up to 90C (dry).
Water Resistance] Contributes to outstanding moisture barrier properties of a full Acra-Tex system.
Abrasion Resistance] Provides improved dirt resistance and toughness of a full Acra-Tex system.
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to other stronger solvents.
Acid Resistance] Resists dilute acids.
Alkaline Resistance] Resists dilute alkali.
Salt Resistance] Resists salt spray.

Application

Roller, Airspray

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with aromatic solvent.

Sizes

15L

Bases

Clear, Not Tintable

Use and typical specification

DULUX AcraTex 956/2 AcraGlaze is designed for use over DULUX 954 AcraStone and DULUX AcraTex textured coatings where a deeper gloss is required. It also affords better soil shedding properties and protection against some aggressive environments and in heavy traffic areas.

Typical properties and application data

Application Guide DULUX AcraTex 956/2 AcraGlaze Solvent is applied in a similar manner to normal paints using brush, roller or airless spray. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Solvent Acrylic
Volume solids 20%
Number of coats 1
WFT (Micron per coat) 65
DFT (Micron per coat) 13
Spread Rate Sqm/L Per coat 15.0
Touch Dry 30 minutes
VOC content ???g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Nap Roller, Brush , Spray
Clean up Aromatic solvent
Recoat Time (25°C,50%R.H.) 16 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page