DULUX AcraTex 501/2 AcraPrime Solvent Based

Code: 194-20801

DULUX AcraTex 501/2 AcraPrime Solvent Based Sealer is a deep penetrating clear sealer for consolidating and unifying the surface integrity of powdery masonry surfaces. For use over new and previously coated powdery & friable surfaces.

Features

  • Primes & seals masonry surfaces
  • Deep Penetrating resin

Benefits

  • Ensures good, uniform adhesion of topcoat.
  • Binds powdery & friable masonry and previously coated surfaces.

Performance Guide

Weatherability] Suitable for exterior application when top coated with a full Acra-Tex system.
Heat Resistance] Up to 90C
Water Resistance] Resists rain and condensation when top coated with a full Acra-Tex system.
Abrasion Resistance] Resists abrasion when top coated with a full Acra-Tex system.
Solvent Resistance] Resists aliphatic hydrocarbons, sensitive to alcohols and strong solvents.
Salt Resistance] Resists salt spray when top coated with a full Acra-Tex system.

Application

Roller, Brush, Airspray

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Sizes

15L

Bases

clear

Use and typical specification

DULUX AcraTex 501/2 AcraPrime Solvent Based is used to prime and seal all masonry surfaces. It improves bonding on friable masonry surfaces and is used under DULUX AcraTex 953 Membrane 103 and 953 Membrane 105.

Typical properties and application data

Application Guide DULUX AcraTex 501/2 AcraPrime Solvent Based may be applied by brush, roller and conventional or airless spray. A brush is required to cut in around edges and obstacles. Typical airless set-up: Graco Ultra 500,695,795 using 0.011-0.013 spray tip at approx 1000 psi. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Solvent Acrylic
Volume solids 20%
Number of coats 1
WFT (Micron per coat) 107
DFT (Micron per coat) 15
Spread Rate Sqm/L Per coat 14.0
Touch Dry 2 hours
VOC content <555g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Nap Roller, Brush , Spray
Clean up Mineral Turps
Recoat Time (25°C,50%R.H.) 16 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page