DULUX Durebild® STE - PC237
AS/NZ 3750.1; APAS 2977.
Dulux® Durebild® STE is a versatile, two-pack, high solids epoxy that can be easily applied by spray in shop and by brush and roller on site. Durebild® STE’s surface tolerant feature makes it an excellent universal tie-coat over previously painted surfaces or as a spot-primer and intermediate coat over power tool cleaned steel. The high build characteristics allow you to apply Durebild® STE to higher film builds with fewer coats, saving you time and money.
- Available in the full range of Dulux Colour Specifier Colours and AS2700 colours
- Surface Tolerant formulation
- High solids content
- Cold Cure option for colder months
- Easy to apply on site by brush and roller
- Excellent primer/finish on all internal steel
- Enhanced adhesion over a wide range of substrates and existing coating types
- Higher builds achievable with brush, roller or spray application in fewer coats
- High durability results in lower maintenance and associated costs
- Available in a micaceous iron oxide finish for improved long term durability
|Weatherability||Some chalking and yellowing may occur on exterior exposure if not topcoated with a suitable UV resistant coating, but this will not detract from the high performance protective properties of this coating.|
|Water Resistance||Excellent resistance to fresh and salt water. Factory packaged colours (excluding those containing aluminium) are suitable for immersion.|
|Abrasion Resistance||Good abrasion resistance when fully cured.|
|Solvent Resistance||Resists splash and spillage of most hydrocarbon solvents, refined petroleum products and most common alcohols.|
|Acid Resistance||Suitable for splash and spillage of weak solutions of inorganic and organic acids. Aluminium containing colours are not suitable for acidic conditions.|
|Alkaline Resistance||Excellent resistance to splash and spillage of strong alkali. Aluminium containing colours are not suitable for alkaline conditions.|
|Salt Resistance||Excellent resistance to neutral and alkaline salt solutions. Aluminium containing colours are not suitable for alkaline conditions.|
Roller, Brush, Airspray, Conventional Spray
Ensure surface is sound and has been cleaned and prepared according to coating specification. Remove rust by power tool cleaning and spot prime as soon as practical.
Durebild® STE is particuarly suitable for the maintenance of all types of previously painted substrates, including steel, due to its exceptional wetting and adhesion properties. Durebild® STE is used for the protection of all types of steel structures, particularly where surface preparation is limited to power tool cleaning methods. Durebild® STE does not need to be topcoated in internal environments as it is extremely durable and is available in Dulux Colour Specifier colours. Durebild® STE is also suitable for fresh and salt-water immersion when untinted.
4L and 15L packs
White/light base, Deep Base, Clear Base, N35 Light Grey, LF Golden Yellow, Black, Aluminium
Use and typical specification
[Steel]: Remove rust by power tool clean to AS1627.2 St 3. Remove all coatings not tightly adhering to substrate. Abrade to remove gloss and rough edges on remaining coatings. Typical system: Spot prime bare steel with Durebild® STE @ 125 microns + 1 x Durebild® STE @ 125 microns + 1 x Weathermax® HBR @ 100 microns.