DULUX Luxafloor® RollCoat - PC227
Dulux® Luxafloor® RollCoat™ is a two-pack, high solids epoxy floor coating, with significantly lower odour than conventional epoxies. Luxafloor® RollCoat™ has excellent flow-out on application, and therefore greatly improves the aesthetic appeal of concrete floors.
- Lower VOC and odour compared with conventional epoxies (<140 g/l when mixed)
- Easy to apply by brush, roller, conventional or airless spray
- Smooth, gloss finish with optional Luxafloor® Aggregate for added slip resistance where desired
- Available in a standard range of factory packaged colours and tinted pastel colours
- Extremely tough and hardwearing
|Weatherability||Some chalking and yellowing may occur on exterior exposure if not topcoated with a suitable UV resistant coating|
|Heat Resistance||Up to 120°C dry heat.|
|Water Resistance||Excellent resistance to fresh and salt water. Not suitable for immersion.|
|Abrasion Resistance||Excellent abrasion resistance when fully cured. CS-17 wheels 133 mg/1000 cycles (Taber Abrasion @ 1000g load/wheel)|
|Solvent Resistance||Resists splash and spillage of aromatic and aliphatic hydrocarbon solvents and most common alcohols.|
|Acid Resistance||Suitable for splash and spillage of dilute acids.|
|Alkaline Resistance||Excellent resistance to splash and spillage of most alkalis.|
|Salt Resistance||Excellent resistance to neutral and alkaline salt solutions.|
Roller, Brush, Airspray, Conventional Spray
Degrease if necessary. Diamond grind or shot blast the floor to remove laitance and create a sound, profiled substrate. Areas inaccessible to diamond grinder or shot blast equipment shall be ground to a matching profile with power tools. Remove all dust and debris. Fill or patch holes and make flush with surrounding concrete. Ensure moisture content is below 10%.
Luxafloor® RollCoat™ is suitable for all flooring projects requiring a hardwearing surface. The extensive colour range makes Luxafloor® RollCoat™ suitable for use in internal floor areas such as car parks, garages and warehouses.
Factory packaged colours and mid base
Use and typical specification
Concrete: Detergent wash if necessary to remove oily deposits. Diamond grind to remove surface imperfections and laitance and provide a good key for the coating system. Typical system: 2 x Luxafloor® RollCoat™ @ 125 microns per coat.