DULUX AcraTex 950 Roll On 00
Code:
194-20814
Approvals:
APAS-0117/3,APAS-0118/3 (system approval)
DULUX AcraTex 950 00 is a flexible 100% acrylic, low profile Texture Coating applied variously by medium or coarse texture roller to produce a roller stipple finish or by gravity feed hopper spray to produce a low profile decorative spray stipple.
Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle effeciency
Features
- Water based
- Easy to apply by texture roller
- Versatile application
- 7 year warranty when applied as a full Acra-Tex system
Benefits
- Easy, safe and economical clean-up.
- Range of texture profiles possible.
- Quick, efficient application with roller or spray
- Guaranteed long term exterior durability.
Performance Guide
| Weatherability | ] Excellent resistance to cracking, flaking and chalkingwhen topcoated with DULUX AcraTex 955 AcraShield. |
| Heat Resistance | ] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1. |
| Water Resistance | ] Resists rain and condensation when top coated with a full Acra-Tex system. |
| Abrasion Resistance | ] Good abrasion resistance especially when topcoated with DULUX AcraTex 955 AcraShield. |
| Solvent Resistance | ] Resists alcohol and aliphatic hydrocarbons. Sensitive to strong solvents. |
| Acid Resistance | ] Slight softening with dilute acids. Inert when topcoated with DULUX AcraTex 955 AcraShield. |
| Alkaline Resistance | ] Slight softening with dilute alkali. Inert when topcoated with DULUX AcraTex 955 AcraShield. |
| Salt Resistance | ] Resists salt spray especially when topcoated with DULUX AcraTex 955 AcraShield. |
Application
Roller
Surface Preparation
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Clean Up
Clean all equipment with water after use.
Sizes
15L
Bases
Tintable to Pastel & Deep colours. Max 1y per litre tint.
Use and typical specification
Applied by medium cell Texure Roller to produce a low profile (non-aggregate) Texture Finish for Commercial or Residential facades
950 Roll On 00 is specified in system with AcraPrime and AcraShield
|
| Typical System Specification |
950 Roll On 00 specified in a full AcraTex 3-step Texture system |
| Substrate Preperation |
Relative to Project Substrate and Specified Finish - refer
to Project Specific Duspec Specification and AcraTex Substrate Guide |
|
Product |
Spread Rate (Sqm/L) |
WFT (Micron) |
DFT (Micron) |
| Primer |
AcraPrime 501 |
10 |
100 |
25 |
| Texture / Body Coat |
950 Roll On 00 |
1.7 |
600 |
350 |
| Protective Barriercoat |
955 AcraShield |
6 |
166 |
75 |
| Minimum system DFT |
450 |
| Notes |
TYPICAL specification example over a levelled substrate - for full detail refer to
Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
|
System performance data
| Test results |
Test method |
Unit of measure |
Results |
Comment |
| Water Transmission |
AS458.5/B |
g/24h/m2/kpa |
<1.0g/24h/m2/kPa |
Provides a barrier agianst water ingress when top coated with 955 Acrashield |
| Water Vapour Transmission |
AS458.5/C |
g/24h/m2 |
55g/24h/m2 |
Allows substrate to breath even when top coated with 955 Acrashield |
Dirt Pick Up |
(AS 1580 481.14) |
(scale 0-5 with 0 is no dirt) |
1 |
Excellent dirt ressistance when top coated with 955 Acrashield |
Caustic Soda diluted |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Alchol |
<N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Diluted mineral acid |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Distilleed Water |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Detergent Solution |
N/A |
N/A |
No reaction |
Test resulst are with 955 Acrashield top coat |
Typical properties and application data
| Application Guide |
Dulux AcraTex 950 Roll-On 00 Low profile by regular texture roller at regular texture roller at 1.53 sq.m/l. High profile by coarse texture roller at 1.3sq.m/l , apply regular texture roller/steel trowel at 1.25 sq.m/l, to achieve stucco texture or alternative by spray - hopper gun at 1.7 sq.m/l to a stipple tetxture. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
|
| Technology Type |
100% Acrylic |
| Volume solids |
60% |
| Number of coats |
1 |
| WFT (Micron per coat) |
583 |
| DFT (Micron per coat) |
350 |
| Spread Rate Sqm/L Per coat |
1.7 |
| Touch Dry |
60 minutes |
| VOC content |
<25g/L untinted |
| Toxicity |
Lead free. Forms a non toxic film. Conforms to AS1647.3 |
| Application |
Texture roller |
| Clean up |
Water |
| Recoat Time (25°C,50%R.H.) |
24 hours |
Full Cure (25°C,50%R.H.) |
7 days |
| Shelf Life |
24 months maximium |
| Sizes |
15 Litres |
Notes |
Spread rates nominated are theoretical maximum rates
required to achieve the specified film builds for technical performance
|