HEBEL Power Finish Advance
Hebel® PowerFinish is a mid build, trowel applied flexible acrylic finishing and barrier texture coat that provides the decorative final layer delivering a fine Tuscan style finish whist maintaining barrier performance through its unique water phobic.
Can be overcoated with AcraShield weather-proofing barrier topcoat for optimum life cycle effeciency.
- Anti Wet Advance formulation
- Leading Acrylic polymer science
- Even granular appearance
- Iron Oxide free
- Barrier agianst moisture and dirt pick up
- Flexible & non shrinkage , easy & ecconomicla to apply
- Tuscan style look & finish
- Guaranteed not to rust.
|Weatherability||] Excellent resistance to cracking, flaking and
chalking as part of a full Acra-Tex system|
|Heat Resistance||] Up to 90C (dry)|
|Water Resistance||] Water resistant with good vapour permeability|
|Abrasion Resistance||] Good resistance to abrasion especially when
topcoated with DULUX 955 AcraTex
|Solvent Resistance||] Resists alcohol and aliphatic hydrocarbons.
Sensitive to strong solvents.|
|Acid Resistance||] Slight softening with dilute acid. Inert when
topcoated with DULUX AcraTex 955
|Alkaline Resistance||] Slight softening with dilute alkali. Inert when
topcoated with DULUX AcraTex 955 AcraShield|
|Salt Resistance||] Resists salt spray especially when topcoated
with DULUX AcraTex 955 AcraShield.|
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Clean all equipment with water.
Tintable to Pastel & Deep colours. Max 1y per litre tint.
Use and typical specification
|Applied by Plastering Technique (Hawk and Trowel) and Float Finished to produce a Flexible Acrylic Finishing Texture and Weatherproofing coat over Hebel PowerBase for Residential facades
Hebel PowerFinish Advance is specified in system with Hebel PowerBase specifically for Hebel PowerPanel
|Typical System Specification
||Hebel PowerFinish Advance specified in the AcraTex POWER System for New Residential|
||Relative to Project Substrate and Specified Finish - refer
to Project Specific Duspec Specification and AcraTex Substrate Guide|
||Spread Rate (Sqm/L)
||Not required on clean Hebel PowerPanel
||Hebel PowerBase LW
||Hebel PowerFinish Advance
|Minimum system DFT
||TYPICAL specification example over a levelled substrate - for full detail refer to
Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
AcraShield Elastomeric shieldcoat is recomended where accent colours are required and for maximum performance in coastal/harsh locations
Typical properties and application data
||Hebel® PowerFinish Advance is applied by Plastering Technique (Hawk and Trowel) and float finished
to achieve an even granular appearance.
Two applicators are required for most areas - one applying the other processing the finish. Delivery must be to a uniform thickness.
For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
|Number of coats
|WFT (Micron per coat)
|DFT (Micron per coat)
|Spread Rate Sqm/L Per coat
||Lead free. Forms a non toxic film. Conforms to AS1647.3
|Number of coats
|Recoat Time (25°C,50%R.H.)
||Full Cure (25°C,50%R.H.)
|| 7 days
||24 months maximium
||Spread rates nominated are theoretical maximum rates
required to achieve the specified film builds for technicalperformance