HEBEL Power Finish.

Code: 194-85698

Hebel® PowerFinish is a mid build, trowel applied flexible acrylic finishing and barrier texture coat that provides the decorative final layer delivering a fine Tuscan style finish whist maintaining barrier performance through its unique water phobic. Can be overcoated with AcraShield weather-proofing barrier topcoat for optimum life cycle effeciency.

Features

  • Anti Wet Advance formulation
  • Leading Acrylic polymer science
  • Even granular appearance
  • Iron Oxide free

Benefits

  • Barrier agianst moisture and dirt pick up
  • Flexible & non shrinkage , easy & ecconomicla to apply
  • Tuscan style look & finish
  • Guaranteed not to rust.

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalking as part of a full Acra-Tex system
Heat Resistance] Up to 90C (dry)
Water Resistance] Water resistant with good vapour permeability
Abrasion Resistance] Good resistance to abrasion especially when topcoated with DULUX 955 AcraTex AcraShield .
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to strong solvents.
Acid Resistance] Slight softening with dilute acid. Inert when topcoated with DULUX AcraTex 955 AcraShield.
Alkaline Resistance] Slight softening with dilute alkali. Inert when topcoated with DULUX AcraTex 955 AcraShield
Salt Resistance] Resists salt spray especially when topcoated with DULUX AcraTex 955 AcraShield.

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water.

Bases

Tintable to Pastel & Deep colours. Max 1y per litre tint.

Use and typical specification

Applied by Plastering Technique (Hawk and Trowel) and Float Finished to produce a Flexible Acrylic Finishing Texture and Weatherproofing coat over Hebel PowerBase for Residential facades
Hebel PowerFinish is specified in system with Hebel PowerBase specifically for Hebel PowerPanel
Typical System Specification Hebel PowerFinish specified in the AcraTex POWER System for New Residential
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer Not required on clean Hebel PowerPanel - - -
Base Coat Hebel PowerBase LW 0.45 2200 2000
Texture Barriercoat Hebel PowerFinish 0.9 900 700
Minimum system DFT 2700
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance
AcraShield Elastomeric shieldcoat is recomended where accent colours are required and for maximum performance in coastal/harsh locations

Typical properties and application data

Application Guide Hebel® PowerFinish is applied by Plastering Technique (Hawk and Trowel) and float finished to achieve an even granular appearance. Two applicators are required for most areas - one applying the other processing the finish. Delivery must be to a uniform thickness. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 74.4%
Number of coats 1
WFT (Micron per coat) 949
DFT (Micron per coat) 706
Spread Rate Sqm/L Per coat 0.7
Touch Dry 1 hour
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
VOC content <30.6g/L untinted
Application Trowel
Number of coats 1
Clean up Water
Recoat Time (25°C,50%R.H.) 24 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 litre
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page