DULUX AcraTex 952 Spray On 1mm

Code: 194-20818

Approvals: APAS-118/4 (system approval)

DULUX AcraTex 952 1mm is a flexible 100% acrylic, low profile sand finish Texture Coating designed for broad wall application typically for Commercial Applications producing a Tuscan style mineral appearance. Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle effeciency

Features

  • 7 year warranty when used as a full Acra-Tex system
  • 100% water-based acrylic
  • Fast Spray applicatioinn - high iscosity
  • Low maintanance

Benefits

  • Guaranteed long term exterior durability.
  • Easy, safe and economical clean-up.
  • Ideal for spray application for uniform finish.
  • Weatherproof & stays cleaner top reducing maintenance when top coated with 955 Acrashield

Performance Guide

Weatherability] Excellent resistance to cracking, flaking & chalking as part of full system.
Heat Resistance] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance] Resists rain and condensation when top coated with Dulux Acra-Tex 955 Acrashield
Abrasion Resistance] Good abrasion resistance especially when topcoated with DULUX AcraTex 955 AcraShield.
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to other strong solvents.
Acid Resistance] Slightly softening with dilute acids. Inert when topcoated with DULUX AcraTex 955 AcraShield.
Alkaline Resistance] Slightly softening with dilute alkalis. Inert when topcoated with DULUX AcraTex 955 AcraShield.
Salt Resistance] Resists salt spray.

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water.

Sizes

15L

Bases

Tintable to Pastel & Deep colours. Max 1y per litre tint.

Use and typical specification

Applied by Hopper Gun (gravity feed) or Air-assisted TexSpray pump, to produce a fine-medium (aggregate) Texture profile.
Typically used for broadwall Commercial facades, 952 Spray On 1mm is specified in system with AcraPrime and AcraShield
Typical System Specification 952 Spray On 1mm specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat 952 Spray On 1mm 1.3 800 500
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 600
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

System performance data

<
Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with 955 Acrashield
Water Vapour Transmission AS458.5/C g/24h/m2 23.4g/24h/m2 Allows substrate to breath even when top coated with 955 Acrashield
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with 955 Acrashield
Caustic Soda diluted N/A N/A No reaction Test resulst are with 955 Acrashield top coat
AlcholN/A N/A No reaction Test resulst are with 955 Acrashield top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

Typical properties and application data

Application Guide Dulux AcraTex Spray-On 1mm is applied in two passes using a DULUX AcraTex hopper gun. Thin slightly with water to aid application of the first pass, to form a low profile motley base completely covering the substrate. Apply the second pass unthinned at 60% cover to achieve the required finish. GUn set up uses a 2 to 4mm fluid nozzle set at 50-60 psi for the first pass and 30-40 psi for the second pass. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 65%
Number of coats 1
WFT (Micron per coat) 800
DFT (Micron per coat) 500
Spread Rate Sqm/L Per coat 1.3
Touch Dry 60 minutes
VOC content <30g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Hopper Gun - Spray
Clean up Water
Recoat Time (25°C,50%R.H.) 24 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page