DULUX AcraTex 956/1 AcraGlaze Water Based
DULUX AcraTex 956/1 AcraGlaze Water Based is a clear gloss finish for application over AcraTex AcraStone (exposed aggregate) and Coventry Quartz Coat (mineral Trowel Finish) to seal and enhance system performance.
- 7 year warranty when used as a full Acra-Tex system
- Water based
- Resists harsh environment
- Binds aggregate surfaces
- Guaranteed long term durability.
- Easy, safe and economical clean-up.
- Protects against dirt pick-up, pollution & chemical attack.
- Enhances natural colours & binds loose aggregate.
|Weatherability||] Excellent resistance to cracking and flaking as the topcoat of a full system.|
|Heat Resistance||] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.|
|Water Resistance||] Contributes to outstanding moisture barrier properties of full texture systems.|
|Abrasion Resistance||] Very good resistance to abrasion.|
|Solvent Resistance||] Resists alcohol and aliphatic hydrocarbons. Sensitive to other stronger solvents.|
|Acid Resistance||] Resists dilute acids.|
|Alkaline Resistance||] Resists dilute alkali.|
|Salt Resistance||] Resists salt spray.|
Roller, Brush, Airless spray
Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Clean all equipment with water after use.
Clear, Not tintable
Use and typical specification
DULUX AcraTex 956/1 AcraGlaze Water Based is principally used for overcoating DULUX AcraTex 954 AcraStone, Two tone DULUX AcraTex 953 Membrane 103 finishes. The product has also been widely used over brick & stone work as a protective clear coating.
Typical properties and application data
||DULUX DULUX AcraTex 956/1 AcraGlaze Water Based is applied in a similar manner to normal paints using brush, roller or airless spray For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. |
|WFT (Micron per coat)
|Number of coats
|DFT (Micron per coat)
|Spread Rate Sqm/L Per coat
||Lead free. Forms a non toxic film. Conforms to AS1647.3
||Nap Roller or Airless Spray
|Recoat Time (25°C,50%R.H.)
||Full Cure (25°C,50%R.H.)
|| 7 days
||24 months maximium
||Spread rates nominated are theoretical maximum rates
required to achieve the specified film builds for technical performance