DULUX Duramax High Performance Enamel Spray Paint
Dulux Duramax® High Performance Enamel is a premium spray paint that provides long lasting colour, excellent coverage on wood, metal and most plastic, and dries ten times faster than an alkyd spray paint, meaning your projects are completed quicker and easier.
- Dries 10x faster than normal alkyd spray paint
- Coverage of 4.5m2
- Bonds to wood, metal and most plastic
- Comfort tip nozzle to reduce fatigue when spraying
- Projects ready to use in 1 hour
- Long lasting colour
- Polishable topcoat
- Interior and exterior use
Aerosol Spray Paint
The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray.
Undercoat dark surfaces with Dulux Duramax Undercoat to achieve the brightest finish. Prime all bare steel and iron with Dulux Duramax Metal Primer. Prime all plastic with Dulux Duramax Plastic Primer.
Shake can for at least three minutes before use and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C.
Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.
If undercoating is necessary use Dulux Duramax Undercoat.
Prime all bare steel and iron with Dulux Duramax Metal Primer.
Prime all plastic with Dulux Duramax Plastic Primer.
Material Safety Data Sheet
Never try to paint over an area that is partially dried as the brush will leave marks on the surface. If you see a run in wet paint, act immediately with light, even strokes.