DULUX Duramax 2K Gloss Clear Spray Paint

Code: 31TD1258-126G

Dulux® Duramax® 2 Pack Gloss Clear Coat is a high performance 2-component spray delivering a protective finish on special projects inside and outside the home. The unique combination of technology delivers superior chemical, abrasion, scratch and weather resistance. Ideal for use on wood, metal, chrome and most plastics. Can be used with all Dulux Duramax products. Note: Dulux Duramax 2 Pack Gloss Clear Coat has two parts in the can that must be mixed. Ensure instructions are followed.

Features

  • High performance 2-component technology for a protective and durable finish
  • Superior chemical, abrasion, scratch and weather resistance
  • Ideal for use on wood, metal, chrome and most plastics

Benefits

  • Protective finish on special projects inside and outside the home
  • High gloss finish
  • Convenient 2-component application
  • Can be used with all Dulux Duramax products

Application

Aerosol Spray Paint

Surface Preparation

The surface must be clean and dry, free from grease, rust and dirt. Protect adjoining surfaces from overspray. Application The hardener is integrated in a separate cartridge in the spray can. To mix the hardener with the A-component, place the can upside down on a flat surface. Remove the protective cap from the bottom of the can. Take the metal ring out of the protective cap and thread it into the pin. Pull the pin at the bottom of the can as far as it will go. Turn the cartridge 360° to release the hardener and mix Part A and B. Before Spraying Shake can for at least three minutes before use and regularly during use. Lower temperatures and high humidity will slow the drying and affect the gloss level. Avoid spraying when air or surface temperature is below 10°C or above 30°C.

Clean Up

Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.

Uses

Prevent blocking by turning the can upside down and spraying until clear gas emerges. Also wipe front of nozzle clean. Clean up overspray while it is still wet with mineral turps.

Sizes

125G

Product downloads

Material Safety Data Sheet

Related products

Dulux Facts

Weatherboards should be painted in two stages. Paint the underside first, then the face. Do three or four at a time before moving on.

 

 

Top of the page