DULUX Metalshield Epoxy Enamel
31A-Line, 31B-Line, 31C-Line
A heavy duty topcoat that is ideal for protecting and decorating metal surfaces. Dulux Metalshield Epoxy Enamel provides a convenient solution where no primer is required over new bare steel, wrouhgt iron or pre-painted metal surfaces.
- Protects against rust and corrosion
- No primer required for new bare steel, wrought iron or pre-painted metal surfaces
- Ideal for metal gates, fences, outdoor furniture, gutters, downpipes and railings
Roller, Brush, Airspray, Con-Spray
NOTE: Ensure the surface has thoroughly dried prior to application. this product is ideal for domestic applications. For highly corrosive environments and for commercial applications, refer to duspec.com.au or duspec.co.nz for appropriate specifications.
PRE-PAINTED METAL SURFACES: Scrape off all loose and flaking paint. Sand all surfaces to a flat finish. Dust off. If previously painted surface is in good condition then no primer is required. Treat any bare metal as below.
AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield All Surface Primer.
NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Then abrade with Scotch-Brite Pad, wipe clean.
GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield RFU Etch Primer.
ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield All Surface Primer.
Clean up with Metalshield Brush Thinner.
Suitable for new bare steel, wrought iron and pre-painted metal surfaces. Ideal for metal gates, fences, outdoor furniture, gutters, downpipes and railings. Use in combination with Metalshield primers for industrial strength metal protection.
500ml, 1L, 4L
Gloss Vivid White, Gloss Deep Base, Gloss Ultra Deep Base, Gloss Extra Bright Base, Gloss True Red, Gloss Bold Yellow, Gloss Blue Base, Gloss Black, Gloss Indian Red, Gloss Mission Brown, Gloss Brunswick Green, Gloss Classic Cream, Gloss Woodland Grey, Gloss Manor Red, Flat White, Flat Black, Satin Black
Material Safety Data Sheet
Prepare walls with Selley’s® Sugar Soap before you paint to remove dirt and grease from your surface. Give it a quick scrub, rinse, let it dry, then go for it.