DULUX Metalshield QD Enamel Spraypak
A fast dry spraypak coating that can be applied to new bare steel, wrought iron and pre-painted surfaces. It is ideal for the application of detailed and hard to reach areas such as steel brackets, lacework and garden furniture.
- High gloss finish
- Rapid dry
- Excellent coverage
- No primer required over new bare steel, wrought iron or pre-painted metal surfaces
- Ideal for detailed and hard to reach areas
- Convenient spraypak application
NOTE: Ensure the surface has thoroughly dried prior to application.
PRE-PAINTED METAL SURFACES: Scrape off all loose and flaking paint. Sand all surfaces to a flat finish. Dust off. If previously painted surface is in good condition than no primer is required. Treat any bare metal as below.
AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield Etch Primer spraypak.
NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. For maximum protection apply 1 coat of Metalshield Etch Primer Spraypak first.
GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield Etch Primer Spraypak.
ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield Etch Primer Spraypak.
Clean up with Metalshield Brush Thinner
Range of 11 colours: Pewter, Jade, Golden Tan, Sand, Harbour Blue, Black, White, Light Grey, Golden Yellow, Signal Red, Bright Silver
Material Safety Data Sheet
Colour can look different in morning light to afternoon light, so make sure you look at your chosen colour at different stages of the day.