DULUX Texture Medium Cover
A flexible acrylic texture applied directly from the bucket by mitt application. A range of effects can be easily achieved by finishing with a lambswool hand mitt applicator, sponge, brush or broom. This traditional bagging texture is used to create a coloured mottled appearance over brickwork, diffusing, but not completely hiding the brick pattern. It can also be used to create a textured effect over smooth masonry surfaces.
Click here for steps on how to apply this product
- Bagged render finish
- Achieve multiple effects
- Hand mitt applied
- Water based
- Same day recoat and clean up
- Proven durability at high film builds
- Achieves texture finish without special training
- Low cost alternative to traditional rendering and texturing methods
Lambswool hand mitt applicator
Coverage - 3 square metres per L
All surfaces must be thoroughly cleaned and free of all dirt, loose and flaking paint. Efflorescence or mould must be treated before application of paint. New concrete, mortar or cement render must be allowed to cure for 4 to 8 weeks depending on concrete thickness and drying conditions. Fill holes with grouting cement. Wash down with water using a stiff brush to remove all loose material. To test the adhesion of previously painted surfaces, cut an 'X' through the existing paint with a sharp blade, press cellulose tape firmly across the cut and then rip the tape off. If the old paint or render comes off, it should be removed. On porous surfaces, applying a priming coat thinned with water (4 parts Medium Texture: 1 part water) will condition the surface and help aid application of additional coats.
Clean all equipment with water
Application to bricks, cement render, fibre cement and masonry surfaces.
Can be tinted to a wide range of pastel and medium depth colours.
Material Safety Data Sheet - pdf
Generally, it takes less than an hour to paint a door. But make sure you factor in preparation time and drying time between coats.