INTERGRAIN Enviropro Timberseal

Code: 701-94991

High performance, colour enhancing sealer for use on timber and parquetry floors.

Features

  • Water based
  • Enhanced colour development
  • Aids filling open grain timber
  • Low odour

Benefits

  • Brings out timber colours and texture.
  • Timber has an even appearance without discolouration or patchiness

Performance Guide

Gloss level Indicator5-10%
VOC Properties96g/L
WeatherabilityInterior use only.
Water ResistanceGood water resistance
Acid ResistanceSuitable for splash with dilute acid only
Alkali ResistanceSuitable for splash only with dilute alkali

Application

Roller

Surface Preparation

All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. Fine sand the floor, finishing with 100 grit sandpaper, then with 150 mesh screenback and vacuum thoroughly with a commercial grade vacuum cleaner. Shake the pack for 1 minute prior to application. Cut in edges with a brush. Apply Timberseal at 10 - 12m²/L using a 11mm Selleys Spirit micro-fibre roller. Do not overwork the coating. Finishing strokes should be in the direction of the timber grain. Sand the sealer with a worn 150 mesh screen if needed. When screening, ensure that you move quickly over the floor and avoid creating hot spots. If grain raise occurs you can apply the first top coat and then screen the surface. This will create a smooth finish without having to recut the grain of the timber.

Clean Up

Water

Uses

Use on timber and parquetry floors.

Sizes

5L

Use and typical specification

Intergrain Enviropro Timberseal is a high performance water based sealer that develops the natural colours of the timber. Timberseal aids in filling open grain timber, ensuring that the timber has an even appearance without discolouration or patchiness.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet - pdf

Related products

Top of the page
Top of the page