INTERGRAIN Enviropro Endure High Build

Code: 701-line

Very durable, high build, clear, water based polyurethane timber floor finish.

Features

  • Water based
  • High Film Build
  • Low odour
  • Quick Drying
  • Non Yellowing

Benefits

  • Very Durable
  • Multiple Coats can be applied in one day
  • Allows the applicator to use a 2 coat system on most hardwood timbers
  • Clean application equipment with water

Performance Guide

Gloss level IndicatorSatin 30-40%, Gloss 90%
VOC Properties<187g/L
WeatherabilityInterior use only.
Water ResistanceGood water resistance
Abrasion ResistanceVery high abrasion resistance
Acid ResistanceSuitable for splash only with dilute acid
Alkali ResistanceSuitable for splash only with dilute alkali

Application

Roller

Surface Preparation

All surfaces must be clean, dry, free of wax, grease, dust and other contaminants. The presence of contaminants increases the possibility of rejection and delamination. All nail holes and cracks should be filled with Intergrain Woodblend putty. Fine sand the floor, finishing with 100 grit sandpaper, then with 150 mesh screenback and vacuum thoroughly with a commercial grade vacuum cleaner. Shake Endure High Build for 1 minute or until any settled matting agent is reincorporated. Strain product. If using a 2 coat system on hardwoods, apply at a rate of up to 8m²/Lwith a 12mm Rolana roller. Endure High Build is self-priming and therefore a high performance can be achieved without a sealer on most hardwood timbers. However, a 3 coat system is recommended on more porous timbers at a rate of 8-10m²/L . Finishing strokes should be in the direction of the timber grain. To remove grain raise or foreign material, all previous coats should be lightly abraded with a 180 grit or finer abrasive. Endure High Build should be suitable for light abrasion after 4 hours. Any abrading dust and debris should be thoroughly removed. Note: To enhance the colour of timber, Timberseal is recommended as part of a 3 coat system.

Clean Up

Water

Uses

Use on timber and parquetry floors.

Sizes

5L

Bases

Satin & Gloss

Use and typical specification

Intergrain Enviropro High Build is a high performance, non-yellowing water based polyurethane for use on timber and parquetry floors. The unique formulation of Endure High Build delivers high film build and allows the applicator to use a 2 coat system on most hardwood timbers.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page