DULUX Durebild® STE - PC237

Code: 775-LINE

Approvals: AS/NZ 3750.1; APAS 2977.

Dulux® Durebild® STE is a versatile, two-pack, high solids epoxy that can be easily applied by spray in shop and by brush and roller on site. Durebild® STE’s surface tolerant feature makes it an excellent universal tie-coat over previously painted surfaces or as a spot-primer and intermediate coat over power tool cleaned steel. The high build characteristics allow you to apply Durebild® STE to higher film builds with fewer coats, saving you time and money.

Features

  • Available in the full range of Dulux Colour Specifier Colours and AS2700 colours
  • Surface Tolerant formulation
  • High solids content
  • Cold Cure option for colder months
  • Easy to apply on site by brush and roller
  • Excellent primer/finish on all internal steel

Benefits

  • Enhanced adhesion over a wide range of substrates and existing coating types
  • Higher builds achievable with brush, roller or spray application in fewer coats
  • High durability results in lower maintenance and associated costs
  • Available in a micaceous iron oxide finish for improved long term durability

Performance Guide

WeatherabilitySome chalking and yellowing may occur on exterior exposure if not topcoated with a suitable UV resistant coating, but this will not detract from the high performance protective properties of this coating.
Water ResistanceExcellent resistance to fresh and salt water. Factory packaged colours (excluding those containing aluminium) are suitable for immersion.
Abrasion ResistanceGood abrasion resistance when fully cured.
Solvent ResistanceResists splash and spillage of most hydrocarbon solvents, refined petroleum products and most common alcohols.
Acid ResistanceSuitable for splash and spillage of weak solutions of inorganic and organic acids. Aluminium containing colours are not suitable for acidic conditions.
Alkaline ResistanceExcellent resistance to splash and spillage of strong alkali. Aluminium containing colours are not suitable for alkaline conditions.
Salt ResistanceExcellent resistance to neutral and alkaline salt solutions. Aluminium containing colours are not suitable for alkaline conditions.

Application

Roller, Brush, Airspray, Conventional Spray

Surface Preparation

Ensure surface is sound and has been cleaned and prepared according to coating specification. Remove rust by power tool cleaning and spot prime as soon as practical.

Uses

Durebild® STE is particuarly suitable for the maintenance of all types of previously painted substrates, including steel, due to its exceptional wetting and adhesion properties. Durebild® STE is used for the protection of all types of steel structures, particularly where surface preparation is limited to power tool cleaning methods. Durebild® STE does not need to be topcoated in internal environments as it is extremely durable and is available in Dulux Colour Specifier colours. Durebild® STE is also suitable for fresh and salt-water immersion when untinted.

Sizes

4L and 15L packs

Bases

White/light base, Deep Base, Clear Base, N35 Light Grey, LF Golden Yellow, Black, Aluminium

Use and typical specification

[Steel]: Remove rust by power tool clean to AS1627.2 St 3. Remove all coatings not tightly adhering to substrate. Abrade to remove gloss and rough edges on remaining coatings. Typical system: Spot prime bare steel with Durebild® STE @ 125 microns + 1 x Durebild® STE @ 125 microns + 1 x Weathermax® HBR @ 100 microns.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page