DULUX Super Enamel Semi Gloss

Code: 378-LINE

Approvals: GPC-E-10; GPC-P-020/2, APAS-0015/3, APAS-0020, AS3730, Part 5.

A tough, traditional, oil based interior semi gloss enamel.


  • Oil based
  • Hard wearing
  • Semi gloss finish
  • Superior flow and levelling


  • Provides a tough traditional finish
  • Ideal for heavy traffic areas
  • Aesthetic appeal of subdued gloss level suitable for walls & ceilings
  • Superior flow and levelling helps achieve an ultra smooth finish
  • Highly washable

Performance Guide

Gloss Level Indicator35
VOC Properties< 430g/L untinted
WeatherabilityNot recommended for exterior use.
Heat ResistanceUp to 120C. Premature yellow and embrittlement will occur if film subject to 120C continuously.
Water ResistanceExcellent resistance to condensation and water splash
Abrasion ResistanceExcellent
Solvent ResistanceResists alcohol, mineral turpentine and similar solvents.
Acid ResistanceFair
Alkali ResistanceFair
Salt ResistanceVery good resistance to splash and spillage of non-caustic salt solution


Roller, Brush, Airspray, Con-Spray

Coverage - 15 square metres per L

Surface Preparation

Remove grease, oil, etc. by washing with a commercial paint cleaner. Thoroughly rinse and allow to dry. Acid and alkali contamination should be removed by thorough rinsing with clean water. Efflorescence or mould on plaster, masonry or timber surfaces must be treated. Rust, millscale, oxide deposits, loose or flaking paint or other foreign material on metal surfaces should be removed in accordance with the requirements of the chosen system, then apply primer, sealer or undercoat as required.


DULUX Super Enamel Semi Gloss is a high quality, hard wearing oil based interior semi gloss enamel for use on walls, doors, architraves and timber trim.


500ml, 1L, 4L, 10L


Machine tinted to a full range of colours from an extensive range of white and coloured bases.

Use and typical specification

Use DULUX Super Enamel Semi Gloss as a high quality semi gloss enamel finish on correctly primed or undercoated interior timber, masonry, plaster and metal surfaces. Its hard wearing properties suit it to areas subject to heavy traffic in commercial and industrial buildings.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page