DULUX Professional Enviro2 Acrylic Sealer Undercoat

Code: 566-84191

Approvals: APAS 0172

DULUX Professional Enviro₂Acrylic Sealer Undercoat is a low odour, low VOC water based prepcoat for use on interior surfaces. The low VOC and low odour formulation contributes positively to indoor air quality and reduced air pollution.


  • Water based
  • Low odour
  • Low VOC
  • High opacity
  • Easy to apply


  • Same day recoat. Easy Cleanup
  • No lingering fumes
  • Improves indoor air quality, suitable for use in GreenStar Buildings
  • Creates a smooth even surface on which to apply topcoats.
  • Reduces application time.

Performance Guide

VOC Properties< 1 g/L untinted


Roller, Brush, Airspray, Con-Spray

Surface Preparation

All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil. Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas. Note : To avoide dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.

Clean Up

Clean all equipment with water


10L, 15L



Use and typical specification

Use DULUX PROFESSIONAL Enviro₂Acrylic Sealer Undercoat to seal and undercoat paper faced wallboards, masonry and interior timber. It should not be used on set plaster, fibrous plaster, plaster glass or tannin rich timbers.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page