DULUX Super Enamel High Gloss
GPC-E-15/3, GPC-E-15/4, GPC-E-24, GPC-E-34/2, APAS-0015, APAS-24/1, APAS-0034/2, AS3730, Part 6 & 11.
A tough, traditional, oil based interior/exterior high gloss enamel.
- High gloss
- Hard tough film
- Lead free
- Deep full gloss
- Ideal for painting doors - scrubbable and resists knocks and scratches
- Ideal for painting windows
- Safe to use anywhere around the home
|Gloss Level Indicator||85|
|VOC Properties||< 425g/L untinted|
|Weatherability||Good weather resistance, may show tendency to chalk after several years.|
|Heat Resistance||Up to 120C. Premature yellowing and embrittlement will occur if film subjected to continuous heat.|
|Water Resistance||Resists rain and condensation for prolonged periods.|
|Abrasion Resistance||Excellent resistance to abrasion.|
|Solvent Resistance||Resists alcohols and aliphatic hydrocarbons. Film is liable to attack from other strong solvents.|
|Salt Resistance||Resists salt spray.|
Roller, Brush, Airspray, Con-Spray
Coverage - 15 square metres per L
Remove grease, oil, etc. by washing with a commercial paint cleaner. Thoroughly rinse and allow to dry. Acid and alkali contamination should be removed by thorough rinsing with clean water. Efflorescence or mould on plaster, masonry or timber surfaces must be treated. Rust, millscale, oxide deposits, loose or flaking paint or other foreign material on metal surfaces should be removed in accordance with the requirements of the chosen system. Use primer, sealer or undercoat where required.
Clean all equipment with Mineral Turpentine.
DULUX Super Enamel High Gloss is a high quality interior/exterior high gloss enamel for doors, windows & trim.
500ml, 1L, 4L, 10L
A full range of colours from an extensive range of white and coloured bases
Use and typical specification
Use DULUX Super Enamel High Gloss as a high quality hard wearing full gloss finish coat for suitably prepared interior and exterior timber, masonry and metal substrates