DULUX AcraTex Roof Primer Surfacer

Code: 194-85941

DULUX AcraTex Roof Primer Surfacer is a Waterbased, High build acrylic, primer-surface filler for pitted concrete roof tiles. Light Grey for improved cover of subsequent coatings. Designed to be applied to suitably prepared aged and pitted concrete roof tiles as part of the approved 962 Roof Membrane System for tile restoration.

Features

  • Water based
  • Excellent pentration & adhesion
  • Fast dry

Benefits

  • Easy application, clean up
  • High Build Formulation
  • Foundation for uniform adhesion & durability of Roof Membrane
  • 4 Hour recoat

Performance Guide

Weatherability] Excellent resistance when topcoated
Heat Resistance] Resistant up to 90 degrees celcius when topcoated with 962 roof Memebrane
Water Resistance] Excellent resistance when topcoated with 962 roof Memebrane
Solvent Resistance] Resists dilute solvent
Acid Resistance] No reaction to 3% hydrochloric acid
Alkaline Resistance] No reaction to 1% caustic solution
Salt Resistance] Excellent resistance when topcoated

Application

Airless spray

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Sizes

15L

Bases

Light Grey

Use and typical specification

DULUX AcraTex Roof Primer Surfacer is used to unify and consolidate correctly prepared aged and pitted concrete roof tiles providing a good key for DULUX AcraTex 962 Roof Membrane. It is designed to condition and even the substrate porosity to provide maximum coverage for DULUX AcraTex 962 Roof Membrane. Note : Not suitable where the tile surface is excessively friable (eg powdery surface easy to remove by scratching-scraping), where the use of AcraTex Roof (Sealer based) is recommended.

Typical properties and application data

Application Guide DULUX AcraTex Roof Primer Surfacer is a applied by airless spray and allow to dry minimum 2 hours before topcoating. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 42.9%
Number of coats 1
WFT (Micron per coat) 233
DFT (Micron per coat) 100
Spread Rate Sqm/L Per coat 4.0
Touch Dry 30 Minutes
VOC content <35g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Spray
Clean up Water
Recoat Time (25°C,50%R.H.) 4 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page