DULUX AcraTex 967 Tuscany Vista

Code: 194-85682

DULUX AcraTex 967 Tuscany Vista Sand is a high build acrylic texture coating producing Tuscan style looks. This revolutionary challenges the specialist Hawk & Trowel method of applying 'Trowel On' texture and render coatings. DULUX AcraTex 967 Tuscany Vista Sand is formulated for 'Roll On' application then simple 'Float flat' finishing.

Features

  • Easy Application
  • Water based
  • Fast processing
  • Long 'wet edge'

Benefits

  • Roller applied (Coarse loop texture sleeve)
  • Water resistant
  • Guaranteed long term exterior when topcoated.
  • Quick, efficient fine trowel tuscan appearance

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalking as part of the full AcraTex system.
Heat Resistance] Up to 60C (dry film)
Water Resistance] Resists rain and condensation when top coated with Dulux Acra-Tex 955 Acrashield
Abrasion Resistance] Excellent resistance to abrasion. when topcoated with DULUX AcraTex 955 AcraShield
Solvent Resistance] Resists achohols & aliphatic hydrocarbons. Sensitive to other strong solvents.
Acid Resistance] Slight softening with dilute acids. Best when topcoated with DULUX AcraTex 955 AcraShield
Alkaline Resistance] Slight softening with dilute alkalis. Best when topcoated with DULUX AcraTex 955 AcraShield
Salt Resistance] Resists salt spray

Application

Roller

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water.

Sizes

15L

Bases

Tintable to Pastel & Deep colours. Max 1y per litre tint.

Use and typical specification

Applied by SPECIAL TEXTURE ROLLER (RotaCota Full Cover Texture Roller) and then float finished to produce a Tuscan Style Sand Finish
Delivers a full Trowel applied float finish without the requirement for extensive plastering skills
967 Tuscany Vista is specified in system with AcraPrime and AcraShield
Typical System Specification 967 Tuscany Vista specified in a full AcraTex 3-step Texture system
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer 967 Tuscany Vista Base Coat 4 250 125
Texture / Body Coat 967 Tuscany Vista 0.8 1333 1000
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 1200
Notes TYPICAL specification example over a levelled substrate - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technicalperformance

System performance data

<
Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa 220g/24h/m2/kPa Outsanding moisture barrier when top coated with 955 Acrashield
Water Vapour Transmission AS458.5/C g/24h/m2 56.5g/24h/m2 Allows substrate to breath even when top coated with 955 Acrashield
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with 955 Acrashield
Caustic Soda diluted N/A N/A No reaction Test resulst are with 955 Acrashield top coa
AlcholN/A N/A No reaction Test resulst are with 955 Acrashield top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

Typical properties and application data

Application Guide DULUX AcraTex 967 Tuscany Vista applied via texture roller at the minimum. Once applied by texture roller the product is processed with a plastic finishing float to a uniform fine trowel finish. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 75%
Number of coats 1
WFT (Micron per coat) 1333
DFT (Micron per coat) 1000
Spread Rate Sqm/L Per coat 0.8
Touch Dry 60 Minutes
VOC content <25g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Texture roller then finish with plastic float
Clean up Water
Recoat Time (25°C,50%R.H.) 24 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page