DULUX AcraTex 958 Sedona

Code: 19485911-12

Approvals: AS4548.4 : Long Life Coatings for Masonry

DULUX AcraTex 958 Sedona is a flexible 100% acrylic, mid build sand texture, formulated to produce a granular sand texture with low profile roller stipple by conventional nap roller or fine texture roller stipple for higher film build and substrate covering power. Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle efficiency

Features

  • High Solids - High Film build
  • Flexability
  • Good External Durability - Weather resistance.
  • Pastel and Ultra Deep Bases
  • Various Finish options
  • Self Priming

Benefits

  • Enhances Sponge Finish Render profile
  • Increased system Crack Bridging performance
  • Weatherproof & stays cleaner top reducing maintenance when top coated with 955 Acrashield
  • Wide colour range, tintable for fast project turn-around
  • Light relief Sandy Texture (nap roller) or Medium Texture (texture rolller)
  • No primer required on sound, cured masonry substrates

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalkingwhen topcoated with DULUX AcraTex 955 AcraShield..
Heat Resistance] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance] Resists water and condensation when topcoated with DULUX AcraTex 955 AcraShield.
Abrasion Resistance] Good resistance to abrasion. when topcoated with DULUX AcraTex 955 AcraShield.
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to other strong solvents.
Acid Resistance] Slightly softening with dilute acids.
Alkaline Resistance] New Cement / Concrete surfaces should be allowed to cure for 28 days to stabalise alkalinity
Salt Resistance] Resists salt spray. when topcoated with DULUX AcraTex 955 AcraShield.

Application

Roller, Brush

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water.

Sizes

15L

Bases

Tintable to Pastel & Deep colours. Max 2y per litre tint.

Use and typical specification

Applied by either nap roller or medium texture roller (dependant on required texture profile) over levelled masonry for Commercial or Residential facades
958 Sedona is typically specified as a 2 coat, nap roller application over AcraPrime to produce and even granular appearance. For ultimate durability AcraShield Performance Topcoat is recommended

Typical System Specification A 958 Sedona specfied for nap Roller application
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat 958 Sedona 3.0 333 160
2nd coat (for best finish) 958 Sedona 3.0 333 160
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 420 (in system with 2 coats 958 Sedona)

Typical System Specification B 958 Sedona specified for Texture Roller application
Substrate Preperation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Texture / Body Coat 958 Sedona 2.0 500 240
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 340
Notes TYPICAL specification examples - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

System performance data

<
Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier agianst water ingress when top coated with 955 Acrashield
Water Vapour Transmission AS458.5/C g/24h/m2 ????g/24h/m2 Allows substrate to breath when top coated with 955 Acrashield
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt ressistance when top coated with 955 Acrashield
Caustic Soda diluted N/A N/A No reaction Test resulst are with 955 Acrashield top coat
AlcholN/A N/A No reaction Test resulst are with 955 Acrashield top coat
Diluted mineral acid N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Distilleed Water N/A N/A No reaction Test resulst are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test resulst are with 955 Acrashield top coat

Typical properties and application data

Application Guide Dulux AcraTex 958 Sedona is applied by brush or nap roller in a two coat application to achieve a medium - course granular sand-paint style finish. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 48%
Number of coats 2
WFT (Micron per coat) 333
DFT (Micron per coat) 160
Spread Rate Sqm/L Per coat 3.0
Touch Dry 60 Minutes
VOC content <75g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Nap Roller, Texture Roller , Brush
Clean up Water
Recoat Time (25°C,50%R.H.) 2 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page