Classique (Bag Finish)

Code: 194-85950

Classique (Bag Finish) is a flexible Full Acrylic, tintable, Texture Coating applied directly from the bucket by mitt applicator and finished variously by bagging mitt, texturing brush or broom finish to the desired feature texture style. Typically applied over suitably prepared flush jointed brickwork softening the hard line brick profile with feature colour and texture. Specified in system with AcraShield weather-proofing barrier topcoat for optimum life cycle efficiency

Features

  • Water based
  • Versatile application
  • Leading acrylic polymer science
  • Low maintanance

Benefits

  • Easy, safe and economical clen up
  • Elegant and variable decorative bagged finish
  • Quick,efficient application with roller, brush and hand mitten
  • Weatherproof & stays cleaner top reducing maintenance when top coated with 955 Acrashield

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalking as part of full system.
Heat Resistance] Up to 90C (dry)
Water Resistance] Resists rain and condensation when top coated with Dulux Acra-Tex 9555 Acrashield
Abrasion Resistance] Good abrasion resistance especially when topcoated with DULUX AcraTex 955 AcraShield.
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to strong solvents
Salt Resistance] Resists salt spray especially when topcoated with DULUX AcraTex 955 AcraShield

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean up equipment with water

Sizes

15L

Bases

Tintable to Pastel & Deep colours. Max 1y per litre tint.

Use and typical specification

Apply using a mitt applicator working the material into and over the substrate, then whilst still wet, finish with sweeping strokes to leave a distressed "bagged-textured" finish.
Classique (Bag Finish) is typically specified over primed, flush jointed brickwork, in multiple coat applications relevant to depth of mortar joints, to produce a decorative effect - softening the sharp brick line pattern
Typical System Specification Classique (Bag Finish), 2 coat application over AcraPrime. Premium system with AcraShield Protective Barrier Coat
Substrate Preparation Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide
Product Spread Rate (Sqm/L) WFT (Micron) DFT (Micron)
Primer AcraPrime 501 10 100 25
Base Coat Classique (Bag Finish) 0.9 1100 500
Finishing Texture Coat Classique (Bag Finish) 0.9 100 500
Protective Barriercoat 955 AcraShield 6 166 75
Minimum system DFT 1100
Notes TYPICAL specification example over clean and stable flush jointed brickwork - for full detail refer to Project Specific Duspec Specification and individual Product Data Sheets
Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

System performance data

<
Test results Test method Unit of measure Results Comment
Water Transmission AS458.5/B g/24h/m2/kpa <1.0g/24h/m2/kPa Provides a barrier against water ingress when top coated with 955 Acrashield
Water Vapour Transmission AS458.5/C g/24h/m2 ????g/24h/m2 Allows substrate to breath when top coated with 955 Acrashield
Dirt Pick Up (AS 1580 481.14) (scale 0-5 with 0 is no dirt) 1 Excellent dirt resistance when top coated with 955 Acrashield
Caustic Soda diluted N/A N/A No reaction Test result are with 955 Acrashield top coat
AlcholN/A N/A No reaction Test resulst are with 955 Acrashield top coat
Diluted mineral acid N/A N/A No reaction Test results are with 955 Acrashield top coat
Distilled Water N/A N/A No reaction Test results are with 955 Acrashield top coat
Detergent Solution N/A N/A No reaction Test results are with 955 Acrashield top coat

Typical properties and application data

a
Application Guide Classique (Bag Finish) is applied by brush or nap roller in a patina motion ( criss cross) in a two coat application. This texture is applied in a an uneven appearance to simulate that of " Bagged Finished Render" over flush jointed brick or block-work via a brush or lambswool mitt. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 44.81%
Number of coats 1-2
WFT (Micron per coat) 1116
DFT (Micron per coat) 500
Spread Rate Sqm/L Per coat 0.9
Touch Dry 1-2 hours
VOC content <57g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Nap Roller, Brush, Hand mitten
Clean up Water
Recoat Time (25°C,50%R.H.) 4 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximum
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page