DULUX AcraTex 956/1 AcraGlaze Water Based

Code: 194-20811

DULUX AcraTex 956/1 AcraGlaze Water Based is a clear gloss finish for application over AcraTex AcraStone (exposed aggregate) and Coventry Quartz Coat (mineral Trowel Finish) to seal and enhance system performance.

Features

  • 7 year warranty when used as a full Acra-Tex system
  • Water based
  • Resists harsh environment
  • Binds aggregate surfaces

Benefits

  • Guaranteed long term durability.
  • Easy, safe and economical clean-up.
  • Protects against dirt pick-up, pollution & chemical attack.
  • Enhances natural colours & binds loose aggregate.

Performance Guide

Weatherability] Excellent resistance to cracking and flaking as the topcoat of a full system.
Heat Resistance] Up to 90C (dry). Meets Early Fire Hazard AS 1530.3. Ignitability 0, Spread 0, Heat 0, Smoke 1.
Water Resistance] Contributes to outstanding moisture barrier properties of full texture systems.
Abrasion Resistance] Very good resistance to abrasion.
Solvent Resistance] Resists alcohol and aliphatic hydrocarbons. Sensitive to other stronger solvents.
Acid Resistance] Resists dilute acids.
Alkaline Resistance] Resists dilute alkali.
Salt Resistance] Resists salt spray.

Application

Roller, Brush, Airless spray

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Clean Up

Clean all equipment with water after use.

Sizes

15L

Bases

Clear, Not tintable

Use and typical specification

DULUX AcraTex 956/1 AcraGlaze Water Based is principally used for overcoating DULUX AcraTex 954 AcraStone, Two tone DULUX AcraTex 953 Membrane 103 finishes. The product has also been widely used over brick & stone work as a protective clear coating.

Typical properties and application data

Application Guide DULUX DULUX AcraTex 956/1 AcraGlaze Water Based is applied in a similar manner to normal paints using brush, roller or airless spray For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets.
Technology Type 100% Acrylic
Volume solids 37%
WFT (Micron per coat) 60
Number of coats 1
DFT (Micron per coat) 22
Spread Rate Sqm/L Per coat 16
Touch Dry 30 Minutes
VOC content <25g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Nap Roller or Airless Spray
Clean up Water
Recoat Time (25°C,50%R.H.) 2 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page