DULUX AcraTex 501/1 AcraPrime Water Based

Code: 194-20809

DULUX AcraTex 501/1 AcraPrime is a pigmented (white) 100% acrylic water based primer/sealer used in typical AcraTex Texture Coatings systems over clean, porous masonry

Features

  • Water based
  • Penetrates masonry surfaces
  • Seals masonry surfaces

Benefits

  • Easy application and economical clean up.
  • Foundation for uniform adhesion & extended durability of subsequent coatings
  • Ensures consistent appearance and finish of total system.

Performance Guide

Weatherability] Suitable for exterior application when top coated with a full Acra-Tex system.
Heat Resistance] Up to 90C when topcoated.
Water Resistance] Resists rain and condensation when top coated with a full Acra-Tex system.
Abrasion Resistance] Resists abrasion when top coated with a full Acra-Tex system. .
Solvent Resistance] Resists aliphatic hydrocarbons, sensitive to alcohols and strong solvents.

Application

Roller, Brush, Airless

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Sizes

15L

Bases

White (not tintable)

Use and typical specification

DULUX AcraTex 501/1 AcraPrime Water Based acrylic primer/sealer is applied to the substrate to unify the substrate porosity, it ensures maximum adhesion and provides excellent key for following texture coats, particularly DULUX AcraTex 950 Roll On , 951 Trowel On , 952 Spray On , 954 AcraStone .

Typical properties and application data

Application Guide DULUX AcraTex 501/1 AcraPrime Water Based may be applied by roller, conventional or airless spray. A brush is required to cut in around edges and obstacles. Typical airless set-up: Graco Ultra 500 using 0.011-0.013 spray tip at approx. 1000 psi. For full details refer to individual Duspec Product and AcraTex Applicational Data Sheets
Technology Type 100% Acrylic
Volume solids 30%
Number of coats 1
WFT (Micron per coat) 65
DFT (Micron per coat) 20
Spread Rate Sqm/L Per coat 10.0
Touch Dry 30 Minutes
VOC content <25g/L untinted
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
Application Nap Roller, Brush , Spray
Clean up Water
Recoat Time (25°C,50%R.H.) 2 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 Litres
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page