DULUX AcraTex 500/13 FastCoat

Code: 194-85640

DULUX AcraTex 500/13 Fastcoat is an acrylic based, granular skimcoat surface leveler for use in system over set joints in approved Dulux AcraTex recessed edge fibre cement substrate systems.

Features

  • 7 year warranty when used as a full Acra-Tex system
  • 100% water-based acrylic
  • Fast processing
  • Produces level basecoat

Benefits

  • Guarenteed long term exterior
  • Flexible, easy clean up.
  • Fast & effiecient application
  • fine trowel render appearance

Performance Guide

Weatherability] Excellent resistance to cracking, flaking and chalking as part of the full DULUX AcraTex system.
Heat Resistance] Up to 90C (dry film)
Water Resistance] Resists rain and condensation when top coated with a full Acra-Tex system.
Abrasion Resistance] Excellent resistance to abrasion. when topcoated w when top coated with a full Acra-Tex system.
Solvent Resistance] Resists achohols & aliphatic hydrocarbons. Sensitive to other strong solvents.
Acid Resistance] Slight softening with dilute acids. Best when topcoated when top coated with a full Acra-Tex system.
Alkaline Resistance] Slight softening with dilute alkalis. Best when topcoated with when top coated with a full Acra-Tex system.
Salt Resistance] Resists salt spray when top coated with a full Acra-Tex system.

Surface Preparation

Relative to Project Substrate and Specified Finish - refer to Project Specific Duspec Specification and AcraTex Substrate Guide

Sizes

15L

Use and typical specification

DULUX AcraTex 500/13 FastCoat can be applied to any sound masonry substrate, it has been carefully formulated to produce a tough intermediate skimcoat over properly set joints on fibre cement sheets then ready for subsequent texture coats. DULUX AcraTex 500/13 can also be used over other masonary substrates as a stand alone texture providing it is applied in two coats then topcoated with DULUX AcraTex 955 AcraShield.

Typical properties and application data

TR>
Application Guide DULUX AcraTex 500/13 Fastcoat is applied to the substrate is a applied by Plastering Technique (Hawk and Trowel) and float finished. Once applied by stainless steel trowel, the product is processed with a plastic finishing float to a uniform fine trowel finish.
Technology Type 100% Acrylic
Volume solids 67%
Number of coats 1
WFT (Micron per coat) 1054
DFT (Micron per coat) 706
Spread Rate Sqm/L Per coat 0.9
Pot Life 1 hour
Touch Dry 1 hour
Toxicity Lead free. Forms a non toxic film. Conforms to AS1647.3
V.O.C Level <15g/L
Application Trowel
Number of coats 1
Clean up Water
Recoat Time (25°C,50%R.H.) 24 hours
Full Cure (25°C,50%R.H.) 7 days
Shelf Life 24 months maximium
Sizes 15 litre
Notes Spread rates nominated are theoretical maximum rates required to achieve the specified film builds for technical performance

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page