DULUX Quantum® FX - PC430

Code: 722-LINE

Quantum® FX is a premium quality, sparkling, metallic two—pack polyurethane designed for areas requiring very long term durability and high visual impact. Quantum® FX offers a range of brilliant, tinted colours in a choice of two grades – Fine and Coarse Metallic. An optional Quantum Clear coat offers a high gloss "wet look".


  • Available in 60 brilliant metallic colours
  • Optional clear high gloss topcoat
  • Available in two grades - fine and coarse
  • Suitable for exterior and interior use
  • Suitable for a wide range of substrates
  • Highly resistant to UV and weathering


  • Highly resistant to marring or marking
  • Wipe clean with Dulux Graffiti Eraser
  • Resists chalking and degradation
  • Quantum Clear coat offers enhanced Graffiti resistance

Performance Guide

WeatherabilityExcellent gloss and colour retention on exterior exposure.
Heat ResistanceUp to 120°C dry heat.
Water ResistanceExcellent resistance to fresh and salt water. Not suitable for immersion.
Abrasion ResistanceExcellent abrasion resistance when fully cured.
Solvent ResistanceUnaffected by splash and spillage of aliphatic and aromatic hydrocarbons, esters, ketones and common alcohols.
Acid ResistanceSuitable for splash and spillage of most acids.
Alkaline ResistanceGood resistance to splash and spillage of most alkalis.
Salt ResistanceUnaffected by splash and spillage of most salt solutions.


Conventional Spray

Surface Preparation

Round off all rough welds and sharp edges, and remove weld spatter. Degrease by detergent wash according to AS1627.1. For all structural and decorative steel, abrasive blast clean to AS1627.4 Class 2.5. Remove all dust. Apply first coat before surface deterioration occurs.


The versatility of Quantum® FX allows you to specify it for most properly prepared substrates. Specifically designed for areas of high public scrutiny, Quantum® FX is perfect for entrance areas, foyers, canopies, awnings, columns, screens, lifts and furniture and feature facade panels on cafes, shopping centres, sports centres and arts complexes.


4L packs


Fine Bright Base, Fine Dark Base, Coarse Bright Base, Coarse Dark Base

Use and typical specification

Mild steel: Abrasive blast AS1627.4 Class 2.5. Typical system: 1 x Zincanode® 402 @ 75 microns + 1 x Duremax GPE @ 150 microns + 1 x Quantum® FX @ 55 microns + Quantum® @ 45 microns.

Product downloads

Product Data Sheet - pdfMaterial Safety Data Sheet

Related products

Top of the page
Top of the page