By brush: This can be done, but may result despite best efforts in localised areas of excess application or drips and runs. Application by clean cloth or sponge is preferred. Decant product into container. Immediately reseal screw cap. Using a brush, apply one coat of Dulux PRECISION® Anti Graffiti Wash Primer to the area. Make sure to spread as far as possible to an almost dry film, and do not leave any drips, runs or heavily coated areas. The lighter the coat the better. If possible wipe over the areas applied with a separate new, clean dry cloth to ensure the lightest coat weight (wipe on, wipe off approach). This primer is an adhesion promoter and does not require high build. In fact, the thinner the better. By cloth: Pour a small amount of Dulux PRECISION® Anti Graffiti Wash Primer into a clean cloth. Immediately reseal screw cap. Wipe cloth over area. Repeat until surface is completely covered. By cloth or sponge: Make sure to use Solvent Resistant Gloves for this type of application. Decant product into a separate container. Immediately reseal the screw cap on the Dulux PRECISION® Anti Graffiti Wash Primer can. Using a dry cloth or sponge apply one coat of primer to the area. Make sure to spread as far as possible and do not leave any drips, runs or heavily coated areas. The lighter the coat the better. If possible wipe over the areas applied with a separate new, clean dry cloth to ensure the lightest coat weight (wipe on, wipe off approach). This primer is an adhesion promoter and does not require high build. In fact the thinner the better.